First Time
Using a Powered Subwoofer
If you’re using a powered subwoofer, as it outputs very
HDMI Input Setup
If you connect a video component to an HDMI IN, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN 1, you must assign HDMI IN 1 to the DVD input selector.
By default, none of the HDMI inputs are assigned. The following input selectors can be assigned: DVD, VCR/DVR, CBL/SAT, AUX.
RECEIVER
ENTER
SETUP
2 | Use the Up and Down [ ]/[ ] |
| buttons to select “1.HDMI Input,” |
and then press [ENTER].
3 Use the Up and Down []/[ ] buttons to select an input selec- tor, and use the Left and Right []/[ ] buttons to select:
IN1: Select if the video component is connected to HDMI IN 1.
IN2: Select if the video component is connected to HDMI IN 2.
IN3: Select if the video component is connected to HDMI IN 3.
No: Select if you’re not using the
HDMI OUT.
4 | Press the [SETUP] button. |
| |
| Setup closes. |
Note:
•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.
1 | Press the [RECEIVER] button, |
| |
| followed by the [SETUP] button. |
44