Onkyo HT-S5100 instruction manual Speaker Package, Subwoofer SKW-560

Models: HT-S5100

1 96
Download 96 pages 53.42 Kb
Page 16
Image 16
Speaker Package

Speaker Package

Subwoofer (SKW-560)

For detailed information, see the pages in parentheses.

Front

1

Rear

2 3

To AC outlet

ASTANDBY/ON indicator

Red: Subwoofer in standby mode

Blue: Subwoofer on

With the Auto Standby function, the SKW-560 automatically turns on when an input signal is detected in Standby mode. When there’s no input signal for a while, the SKW-560 automatically enters Standby mode.

BOUTPUT LEVEL control (47)

This control is used to adjust the volume of the sub- woofer.

CLINE INPUT (23)

This RCA input should be connected to the sub- woofer pre out on the AV receiver with supplied RCA cable.

Note:

The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try slightly increasing or decreasing the subwoofer output level on the AV receiver (page 80).

16

Page 16
Image 16
Onkyo HT-S5100 instruction manual Speaker Package, Subwoofer SKW-560