Onkyo HT-S5100 Common Functions—Continued, 7Using Headphones, Displaying Source Information

Models: HT-S5100

1 96
Download 96 pages 53.42 Kb
Page 49
Image 49
Common Functions—Continued

Common Functions—Continued

7Using Headphones

For private listening, you can connect a pair of stereo headphones (1/4-inch phone plug) to the AV receiver’s PHONES jack.

ON/STANDBY

STANDBY

DOCK

MULTI CH

PHONES

A SPEAKERS

Displaying Source Information

You can display various information about the current input source as follows.

Press the [RECEIVER] REMOTE MODE button, and then press the [DISPLAY] button repeatedly to cycle through the available infor- mation.

Notes:

Always turn down the volume before connecting your headphones.

While the headphones plug is inserted in the PHONES jack, the speakers are turned off.

When you connect a pair of headphones, the listening mode is set to Stereo, unless it was already set to Pure Audio, Mono, Stereo, or Direct, in which case it stays the same.

When the multichannel DVD input is selected, only the front left and front right channels can be heard in the headphones.

Note:

This procedure can also be performed on the AV receiver by using its [DISPLAY] button.

The following information can typically be displayed:

Input source & volume*1

Signal format*2 or sampling frequency

Input source & listening mode

*1 When AM or FM radio is used, the band, preset num- ber, and frequency are displayed.

*2 If the input signal is analog, or AM or FM radio is selected, no format information is displayed. If the input signal is PCM, the sampling frequency is dis- played. If the input signal is digital but not PCM, the signal format is displayed. Information is displayed for about 3 seconds, then the previous display reap- pears.

Interpreting Surround Channel Information

AB C

A:The number of front channels (front left, front right, and center).

B:The number of surround channels (surround left and surround right). If there’s surround back channel information, this number will be 3.

C:LFE channel for subwoofer (1 means yes).

49

Page 49
Image 49
Onkyo HT-S5100 instruction manual Common Functions—Continued, 7Using Headphones, Displaying Source Information, Notes