Onkyo R-801A Setting the Clock, Setting the clock manually, Standby/On, ENTER Number buttons

Setting the Clock

STANDBY/ON	CDR/PC TAPE	INPUT SELECTOR
	STANDBY/ ON
		ACOUSTIC
		PRESENCE
	CD/DVD MD	FM AM

VO

LUME

TIMER

TAPE REW	UP	TAPE FF
	MUTING
	DOWN
SLEEP	CLOCK TIMER	ENTER
MODE	TAPE
REPEAT	CD/DVD
CLEAR	MD
SCROLL	CDR/PC

1	2	3	4
5	6	7	8
9	10/0	--/---

,

ENTER

Number buttons

Setting the clock manually

•The explanation in this section assumes that the unit has been powered on (set to “Stand-by On”). This section explains how to set the clock using the 24-hour display. However, you can later change this set- ting to the 12-hour display.

•The display indicator turns off if you do not operate any buttons for more than one minute during the clock setting pro- cedure.

•The display indicator turns off if a power outage occurs or if the power cord is dis- connected from an AC outlet after you set the clock. In this case, re-set the clock.

•To use the clock function, be sure to con- nect the power cord to the AC outlet that provides an uninterrupted current flow.

1 Press the STANDBY/ON button.

STANDBY/ ON

•If you do not operate any buttons for about eight seconds after you press the TIMER button, the display returns to the previous indication.

•“AUTO” or “MANUAL” appears on the display in Standby mode.

If “MANUAL” appears on the display, press the ENTER button. If “AUTO”

appears on the display, press the or

button to select “MANUAL,” then press the ENTER button.

The day of the week will flash on the dis- play.

3 Press the	or	button or the
number buttons until the desired day
of the week is selected, then press the
ENTER button.
The time will flash on the display.
	1	2	3	4
or	5	6	7	8
	9	10/0	--/---

The STANDBY indicator goes out.

2 Press the TIMER button until “AD- JUST” is selected on the display, then press the ENTER button.

TIMER

ENTER

ENTER

The number buttons on the remote con-

troller:
1: SUN	3: TUE	5: THU 7: SAT
2: MON	4: WED	6: FRI

The day of the week will flash on the dis- play.

24