Listening to the Radio
AM Frequency Step Setup (on some models)
1
2,
1, 5
For AM tuning to work properly, you must specify the AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.
1 | Press the [RECEIVER] button, |
| |
| followed by the [SETUP] button. |
2 | Use the Up and Down [ ]/[ ] |
| buttons to select “0.Hardware- |
Setup,” and then press [ENTER].
3 | Use the Up and Down [ ]/[ ] | |
| buttons to select “AM Freq.” | |
|
|
|
|
|
|
4 Use the Left and Right []/[ ]
buttons to select:
10kHz: Select if 10kHz steps are used in your area.
9kHz: Select if 9kHz steps are used in your area.
5 | Press the [SETUP] button. |
| |
| Setup closes. |
Note:
•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.
51