Specifications
HT-R560
Amplifier Section
Rated Output Power
North American:
130 watts minimum continuous power per channel, 8 ohm loads, 1 channel driven, with a maximum total harmonic distortion of 1.0% (FTC)
European:
7 ch ⋅ 130 W at 8 ohms, 1kHz, 1 ch driven (IEC)
Dynamic Power 210 W (3Ω, Front) (1 ch driven) 190 W (4Ω, Front) (1 ch driven) 130 W (8Ω, Front) (1 ch driven)
THD (Total Harmonic |
|
Distortion) | 0.08% (1kHz 1W) (Power Rated) |
Damping Factor | 60 (Front, 1kHz, 8Ω) |
Input Sensitivity and | 200 mV/ 47 kΩ (LINE) |
Impedance | |
Output Level and | 200 mV/ 2.2 kΩ (REC OUT) |
Impedance | |
Frequency Response | |
Tone Control | ±10 dB, 50Hz (BASS) |
| ±10 dB, 20kHz (TREBLE) |
Signal to Noise Ratio | 100 dB (LINE, |
Speaker Impedance |
Video Section
Input Sensitivity/Output
Level and Impedance 1
0.7
0.28
Component Video |
|
Frequency Response | 5Hz – 50MHz, |
Tuner Section
■FM
Tuning Frequency Range
North American:
European:87.50MHz–108.00MHz
■AM
Tuning Frequency Range
North American:
European:522kHz–1611kHz
Preset Channel | 40 |
General
Power Supply |
|
North American: | AC 120 V, 60Hz |
European: | AC 230 V, 50Hz |
Power Consumption |
|
North American: | 4.9 A |
European: | 480 W |
Dimensions | 435 ⋅ 150 ⋅ 377 mm |
(W ⋅ H ⋅ D) | |
| |
Weight |
|
North American: | 9.8 kg |
21.63lbs.
European and Asian: 10.6 kg
23.40 lbs.
■Video Inputs
HDMI (Assignable) | IN 1, IN 2, IN 3 |
Component | IN 1, IN 2 |
Composite | DVD, CBL/SAT, VCR/DVR, AUX |
DVD, VCR/DVR, CBL/SAT |
■Video Outputs
HDMI | OUT |
Component | OUT |
Composite | MONITOR, VCR/DVR |
MONITOR, VCR/DVR |
■ Audio Inputs
Digital Inputs |
|
|
(Assignable) | 1 | (VCR/DVR), |
| 2 | (CD) (Rear |
| 1 | (DVD), 2 (CBL/SAT) (Rear coax) |
Analog Inputs | DVD (MULTI CH), VCR/DVR, | |
| CBL/SAT, TAPE, CD, AUX, DOCK | |
Multichannel Inputs | 7.1 ch |
■Audio Outputs
Analog Outputs | VCR/DVR, TAPE |
Subwoofer Pre Outputs | 1 |
Speaker Outputs | |
| |
Phones | PHONES |
■Control Terminal
MICYes
Specifications and features are subject to change without notice.
93