Advanced Setup
Speaker Setup
This section explains how to check the speaker settings and how to set them manually, which is useful if you change a speaker after performing the automatic speaker setup.
Some of the speaker settings are set automatically by the Automatic Speaker Setup function (see page 42).
Speaker Configuration, Crossover Frequency, and Double Bass settings only need to be changed if you’re not using the speakers in this package.
These settings cannot be changed while head- phones are connected, speaker set B is on, or the multichannel DVD input is being used.
Speaker Configuration
These settings are set automatically by the Automatic Speaker Setup function (see page 42).
This section explains how to specify which speakers are connected and their sizes.
For speakers with a cone diameter
larger than
with a smaller diameter, specify
Small (default crossover 100Hz). The crossover frequency can be
changed on page 78.
1 | Press the [RECEIVER] button fol- |
| |
| lowed by the [SETUP] button. |
2 Use the Up and Down [
]/[ ] buttons to select “Sp Config,” and then press the [ENTER] but- 
ton.
3
4
5
6
While the “Subwoofer” setting is selected, use the Left and Right [
]/[
] buttons to select Yes or No.
Yes: Select if a subwoofer is con- nected.
No: Select if no subwoofer is con- nected.
Use the Down [ ] button to select “Front,” and then use the Left and Right [
]/[
] buttons to select Small or Large.
Small: Select if the front speakers are small.
Large: Select if the front speakers are large.
Note:
•If the Subwoofer setting in step 3 is set to No, this setting is fixed at Large and does not appear.
Use the Down [ ] button to select “Center,” and then use the Left and Right [
]/[
] buttons to select Small, Large, or None.
Small: Select if the center speaker is small.
Large: Select if the center speaker is large.
None: Select if no center speaker is connected.
Note:
•If the Front setting in step 4 is set to Small, the Large option cannot be selected.
Use the Down [ ] button to select “Surround,” and then use the Left and Right [
]/[
] but- tons to select Small, Large, or None.
Small: Select if the surround speak- ers are small.
Large: Select if the surround speak- ers are large.
None: Select if no surround speakers are connected.
Note:
•If the Front setting in step 4 is set to Small, the Large option cannot be selected.
77
