Listening to SIRIUS Satellite
RECEIVER
ENTER
/ / /
SETUP
Number buttons
Parental Lock
You can lock out channels that you do not want to receive.
1 | Press the [RECEIVER] button, |
| |
Remote | followed by the [SETUP] button. |
controller |
|
3 | Use the Left and Right [ | ]/[ | ] |
| buttons to change the number | ||
| displayed between the angle |
| |
| brackets < >, and then press |
| |
| [ENTER]. Repeat this for each | ||
| digit in the PIN number.* |
|
|
4 | Use the Up and Down [ | ]/[ | ] |
Remote | buttons to select the channel that | ||
controller | you want to lock out, for exam- | ||
|
ple:
5 | Press the Left and Right [ ]/[ ] |
Remote | buttons so that an asterisk |
controller | appears next to the name, as |
| |
| shown below, and then press |
| [ENTER]: |
| The message “Locked” will appear on |
| the display. |
6 | Press the [SETUP] button. |
| |
Remote | Setup closes. |
controller |
|
*The default number is “0000.” If you want to change the default setting, see “Changing the PIN Number” on page 62.
2
Remote
controller
Use the Up and Down []/[ ] buttons to select “10. Parental Lock,” and then press [ENTER].
“Lock : <0>” appears on the dis- play.
Note:
•If the SAT Radio Mode is set to None (see page 56), the “ParentalLock” item is not available.
To unlock a previously locked channel, select the locked channel (see step
61