Onkyo SR608 instruction manual How to record the video

Note

•When you connect to both AUX INPUT AUDIO jacks and AUX INPUT LINE IN jack at the same time, AUX INPUT LINE IN jack will be given a higher priority.

•The AV receiver can output audio and video signals from the AUX INPUT jacks to the VCR/DVR OUT jacks.

*1 Connect a turntable (MM) that has a phono preamp built-in. If your turntable (MM) doesn’t have it, you’ll need a commercially available phono preamp.

If your turntable has a moving coil (MC) type cartridge, you’ll need a commercially available MC head amp or MC transformer as well as a phono preamp. See your turntable’s manual for details.

*2 When you connect your personal computer to PC IN and select PC input selector, video of the personal computer is output from HDMI OUT. However, if you have assigned HDMI IN to the PC input selector, the AV receiver will output signals from HDMI IN instead of signals from PC IN. To get the signals output from PC IN, select “- - - - -” for “PC” in the “HDMI Input” setting

(➔ 39).

•With connection D, you can listen and record audio from the external components while you are in Zone 2. You can lis- ten and record audio from the external components in the main room; you can listen to the audio in Zone 2 as well.

•With connection C, you can enjoy Dolby Digital and DTS. (To record or listen in Zone 2 as well, use C and D.)

•With connection D, if your Blu-ray Disc/DVD player has both the main stereo and multichannel outputs, be sure to connect the main stereo.

■How to record the video

With the connections described above, you cannot record the video through the AV receiver. To make a connection for video recording (➔ 31).

En

19