Onkyo SR608 THX Audio Setup, SurrBack Speaker Spacing, THX Ultra2/Select2 Subwoofer

`Audyssey:

This is selected automatically by Audyssey 2EQ® Room Correction and Speaker Setup function. The Audyssey Dynamic Volume indicator will light (➔ 9) and “Dynamic EQ” and “Dynamic Volume” become available (➔ 45).

`Off:

No Audyssey 2EQ equalizing will apply.

Note

•You can select: “63Hz”, “250Hz”, “1000Hz”, “4000Hz”, or

“16000Hz”. And for the subwoofer, “25Hz”, “40Hz”, “63Hz”, “100Hz”, or “160Hz”.

•While the Direct or Pure Audio (European, Australian, and Asian models) listening mode is selected, the equalizer settings have no effect.

•Audyssey equalizing does not work for DSD sources.

THX Audio Setup

With the “SurrBack Speaker Spacing” setting, you can specify the distance between your surround back speakers. If you’re using a THX-certified subwoofer, set the “THX Ultra2/Select2 Subwoofer” setting to “Yes”. You can then apply THX’s Boundary Gain Compensation (BGC) to compensate the perceived exaggeration of low frequen- cies for listeners sitting very close to a room boundary (i.e., wall).

You can also set the THX Loudness Plus. When the

“Loudness Plus” is set to “On”, it is possible to enjoy even subtle nuances of audio expression at low volume. This result is only available when the THX listening mode is selected.

■SurrBack Speaker Spacing

`< 1ft (< 0.3m):

Select this if your surround back speakers are between 0 and 1 foot (0–30 cm) apart.

`1 ft - 4 ft (0.3 m - 1.2 m):

Select this if your surround back speakers are between 1 and 4 feet (0.3–1.2 m) apart.

`> 4ft (> 1.2m):

Select this if your surround back speakers are more than 4 feet (1.2 m) apart.

Note

Cannot be set if “Surr Back Ch” is set to “1ch” (➔ 41), “Speakers Type” is set to “Bi-Amp” (➔ 41), “Surr Back” is set to “None” (➔ 41), or Powered Zone 2 is being used (➔ 56).

■THX Ultra2/Select2 Subwoofer

`No:

Select this if you do not have a THX-certified sub- woofer.

`Yes:

Select this if you have a THX-certified subwoofer.

Note

•If the “Subwoofer” setting is set to “No”, this setting cannot be selected (➔ 41).

■BGC

`Off:

Select this to turn off BGC.

`On:

Select this to turn on BGC.

Note

•This setting is only available if “THX Ultra2/Select2 Sub- woofer” is set to “Yes”.

■Loudness Plus

`Off:

Select this to turn off Loudness Plus.

`On:

Select this to turn on Loudness Plus.

■Preserve THX Settings

`Yes:

Audyssey Dynamic EQ™ /

Audyssey Dynamic Volume™ will not be active in THX listening mode.

`No:

Audyssey Dynamic EQ /

Audyssey Dynamic Volume will be active in THX listening mode depending on the setting.

Note

• This setting is fixed at “Yes” if “Loudness Plus” is set to “On”.

THX Loudness Plus

THX Loudness Plus is a new volume control technology featured in THX Ultra2 Plus™ and THX Select2 Plus™ Certified receivers. With THX Loudness Plus, home theater audiences can now experience the rich details in a surround mix at any volume level. A consequence of turning the volume below Reference Level is that cer- tain sound elements can be lost or perceived differently by the listener. THX Loudness Plus compensates for the tonal and spatial shifts that occur when the volume is reduced by intelligently adjusting ambient surround channel levels and frequency response. This enables users experience the true impact of soundtracks regard- less of the volume setting. THX Loudness Plus is auto- matically applied when listening in any THX listening mode. The new THX Cinema, THX Music, and THX Games modes are tailored to apply the proper THX Loudness Plus settings for each type of content.

En

43