Setting the Powered Zone 2 |
| Using Zone 2 |
|
|
|
If you’ve connected your Zone 2 speakers to the AV receiver, as explained in “Connecting Your Zone 2 Speak- ers Directly to the AV receiver” (➔ 55), you must set the “Front High/Front Wide/Zone2” setting to “Zone2”.
Menu |
| Speaker Setup |
| |
1 | In the “Speaker Setup” menu, select “Speaker | |||
| Settings”, and then press ENTER. | |||
2 | Use q/wto select “Front High/Front Wide/Zone2” | |||
| and e/rto select “Zone2”. | |||
|
| `Zone2: |
Zone 2 speakers can be used (Powered Zone 2 enabled).
Note
•When “Zone2” is selected and Zone 2 turned on, the Zone 2 speakers connected to the FRONT HIGH OR FRONT WIDE OR ZONE 2 SPEAKERS L/R terminals output sound, but the surround back, front high or front wide speakers connected to the
SURR BACK OR FRONT HIGH OR FRONT WIDE SPEAKERS L/R terminals do not. When “Zone2” is selected and Zone 2 turned off, the surround back, front high or front wide speakers output sound as normal.
•When the “Front High/Front Wide/Zone2” setting is set to
“Zone2” and the input selector of Zone 2 is selected, power con- sumption on standby mode slightly increases.
•Powered Zone 2 cannot be used if “Speakers Type” is set to
En
This section explains how to turn Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2.
Controlling Zone 2 from the AV receiver
ZONE 2 OFF
ZONE 2 indicator Input selector buttons
1 To turn on Zone 2 and select an input source, press ZONE 2 followed by an input selector button within 8 seconds.
Zone 2 turns on, the ZONE 2 indicator lights.
To select AM or FM, press the TUNER input selec- tor button repeatedly.
(North American models) You can also select SIR-
IUS.
To select the same source as that of the main room, press ZONE 2 repeatedly until “Z2 Selector: Source” appears on the display.
Note
•You cannot select different AM or FM radio stations for your main room and Zone 2. The same FM/AM radio sta- tion will be heard in each room.
2 To turn off Zone 2, press OFF.
Note
•While Powered Zone 2 is being used, listening modes that require surround back speakers or front high speakers or front wide speakers (6.1/7.1), such as Dolby Digital EX,
•When the “Front High/Front Wide/Zone2” setting is set to
“Zone2” and the input selector of Zone 2 is selected, power con- sumption on standby mode slightly increases.
56