Controlling Zone 2 with the Remote Controller
ON/STANDBY |
ZONE2 |
Input selector buttons |
MUTING |
VOLq/w |
1 Press ZONE2 and then press ON/STANDBY. Zone 2 turns on, the ZONE 2 indicator lights.
2 To select an input source for Zone 2, press ZONE2, followed by an input selector button.
To select AM or FM, press the TUNER input selec- tor repeatedly.
(North American models) You can also select SIR-
IUS.
Note
•You cannot select different AM or FM radio stations for your main room and Zone 2. The same FM/AM radio sta- tion will be heard in each room.
3 To turn off Zone 2, press ZONE2 followed by ON/
STANDBY.
Note
•To control Zone 2, you must press the remote controller’s ZONE2 first.
Adjusting the Volume for Zone 2
■Operating with the remote controller
|
|
1 | Press ZONE2. |
2 | Use VOL q/wto adjust the volume. |
■Operating on the AV receiver
1Press ZONE 2 (the ZONE 2 indicator and Zone 2 selector on the display flashes).
2Use
If your Zone 2 speakers are connected to a receiver or inte- grated amp in Zone 2, use its volume control to adjust the volume.
Muting Zone 2
■Operating with the remote controller
Press ZONE2 followed by MUTING.
Tip
• To unmute, press ZONE2 followed by MUTING again.
Note
•Only analog input sources are output by the ZONE 2 LINE OUT and FRONT HIGH OR FRONT WIDE OR ZONE 2 SPEAKERS L/R terminals. Digital input sources are not out- put. If no sound is heard when an input source is selected, check if it’s connected to an analog input.
•While Powered Zone 2 is being used, listening modes that require surround back speakers or front high speakers or front wide speakers (6.1/7.1), such as Dolby Digital EX,
•While Zone 2 is on, ufunctions will not work.
•You cannot select different AM or FM radio stations for your main room and Zone 2. The same FM/AM radio station will be heard in each room. For example, if you have an FM station for the main room, that station will also be used in Zone 2.
•Zone 2 can also be unmuted by adjusting the volume.
En
57
