Using the Onkyo Dock

Dock is sold separately.

For the latest information on the Onkyo Dock compo- nents, see the Onkyo web site at: http://www.onkyo.com

Before using the Onkyo Dock components, update your iPod with the latest software, available from the Apple web site.

For supported iPod models, see the instruction man- ual of the Onkyo Dock.

UP-A1 Dock

With the UP-A1 Dock, you can easily play the music, photo, or movie stored on your Apple iPod through the AV receiver and enjoy great sound.

You can use the AV receiver’s remote controller to operate your iPod.

■Basic Operation

The AV receiver may take several seconds to startup, so you might not hear the first few seconds of the first song.

Auto Power On

If you start iPod playback while the AV receiver is on Standby, the AV receiver will automatically turn on and select your iPod as the input source.

Direct Change

If you start iPod playback while listening to another input source, the AV receiver will automatically select your iPod as the input source.

Using the AV receiver’s Remote Controller

You can use the AV receiver’s remote controller to control basic iPod functions (➔ 60).

■Operating Notes

•Functionality depends on your iPod model and generation.

•Before selecting a different input source, stop iPod playback to prevent the AV receiver from selecting the iPod input source by mistake.

•If any accessories are connected to your iPod, the AV receiver may not be able to select the input source properly.

•When connecting UP-A1 Dock to the radio tuner UP-HT1 (North American models)/UP-DT1 (European, Australian and Asian models) with AUTO selected by the tuner’s Mode Selector switch, you can switch the input source between UP- A1 Dock and the tuner, by pressing PORT repeatedly on the front panel.

•While your iPod is in the UP-A1 Dock, its volume control has no effect. If you adjust your iPod models volume control while it’s in the UP-A1 Dock, make sure it’s not set too high before you reconnect your headphones.

•The Auto Power On function will not work if you set your iPod in the UP-A1 Dock while it is playing.

•When Zone 2 is turned on, you can’t use Auto Power On and Direct Change functions.

•Do not turn off the power with the iPod still connected to this unit via the UP-A1 Dock.

•Set your iPod in the UP-A1 Dock after the AV receiver turns on.

■Using Your iPod models Alarm Clock

You can use your iPod models Alarm Clock function to automatically turn on your iPod and the AV receiver at a specified time. The AV receiver’s input source will auto- matically be set to the PORT selector.

Note

•To use this function, your iPod must be in the UP-A1 Dock, and the UP-A1 Dock must be connected to the AV receiver.

•This function works only in the Standard mode (➔ 61).

•When you use this function, be sure to set the AV receiver’s vol- ume control to a suitable level.

•When Zone 2 is turned on, you can’t use this function.

•You cannot use this function for sound effects on your iPod.

■Charging Your iPod models Battery

The UP-A1 Dock charges your iPod models battery while your iPod is in the UP-A1 Dock and connected to the UNIVERSAL PORT jack on the AV receiver. While your iPod is seated in the UP-A1 Dock, its battery will be charged when the AV receiver is set to “On” or “Standby”.

Note

•When UP-A1 Dock that seated iPod is connected, the power consumption on standby mode slightly increases.

■Status Messages

• PORT Reading

The AV receiver is checking the connection with the dock.

• PORT Not Support

The AV receiver do not support the connected dock.

• PORT UP-A1

UP-A1 Dock is connected.

Note

•The AV receiver displays the message “UP-A1” for several sec- onds after recognizing the UP-A1.

•When the status message is not displayed on the AV receiver’s display, check the connection to your iPod.

ND-S1

With the ND-S1 Digital Media Transport, you can easily play the music stored on your iPod through the AV receiver and enjoy great sound.

The ND-S1 processes the digital audio signal directly from your iPod for high-quality digital audio output (opti- cal or coaxial).

Note

•You must select “iPod” using ND-S1’s iPod/PC button.

•Set the AV receiver’s Input Display to “DOCK” (➔ 25).

En

59

Page 58 Page 60
Page 59
Image 59
Onkyo SR608 instruction manual Using the Onkyo Dock, UP-A1 Dock
Page 58 Page 60

SR608 specifications

The Onkyo SR608 is a versatile 7.2-channel home theater receiver that has gained popularity among audio enthusiasts for its impressive combination of features and performance. Launched as part of Onkyo's highly regarded line of A/V receivers, the SR608 stands out for its robust build quality, advanced technology, and user-friendly design.

One of the key features of the Onkyo SR608 is its onboard support for high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats deliver a lossless audio experience, allowing users to enjoy movies and music with unparalleled clarity and detail. Additionally, the receiver is equipped with advanced decoding capabilities, ensuring that it can handle various audio formats from different sources seamlessly.

The SR608 is also noteworthy for its video processing capabilities. It supports video upscaling up to 1080p through its Faroudja DCDi Cinema technology, allowing users to enhance standard-definition content and make it look sharper on high-definition displays. The receiver features multiple HDMI inputs, enabling users to connect a range of devices such as Blu-ray players, gaming consoles, and streaming devices.

Another significant characteristic of the Onkyo SR608 is its robust amplifier section, which delivers a powerful output of 100 watts per channel (into 8 ohms). This ensures that even the most demanding audio tracks can be reproduced with accuracy and depth, making it ideal for a home theater setup that aims to provide an immersive audio experience. The receiver also includes dual subwoofer outputs, allowing for flexible bass management and the ability to create a more dynamic low-frequency response.

For those who appreciate convenience and connectivity, the SR608 comes equipped with a front-panel USB port, providing access to digital music files. Wi-Fi and Bluetooth compatibility can be added through optional adapters, enabling users to stream audio wirelessly from their smartphones or tablets. The receiver is also equipped with Onkyo’s exclusive Audyssey 2EQ technology, which automatically analyzes the acoustics of a room and calibrates the receiver’s settings for optimal sound performance.

In summary, the Onkyo SR608 is a feature-rich A/V receiver that combines powerful audio performance with advanced video processing, making it a favorite among home theater enthusiasts. Its extensive connectivity options, coupled with user-friendly technology, ensure that it remains a strong choice for those looking to build or upgrade their home entertainment system.
Top Page Image Contents