(➔ page 53)

■InstaPrevue

These settings apply to “InstaPrevue” of the Home menu and specify the preview display of HDMI

video streams.

Sub Window

`Multi:

Displays preview thumbnails all at once.

`Single:

Displays preview thumbnails one-by-one. With this setting, you can set the number of preview thumbnails displayed.

Position

(with “Sub Window” set to “Multi”)

`Top, Bottom, Left, Right

(with “Sub Window” set to “Single”)

`Upper Left, Upper Right, Lower Left, Lower Right With this setting, you can set the position of preview thumbnails on the TV screen.

Note

•Depending on video signals, the picture may not be properly rendered on the preview thumbnails of InstaPrevue.

Auto Standby

■Auto Standby

`Off

`On

When “Auto Standby” is set to “On”, the AV receiver will automatically enter standby mode if there is no operation for 30 minutes with no audio and no video signal input.

“Auto Standby” will appear on the AV receiver’s display and OSD 30 seconds before the Auto Standby comes on. Default setting: On (European models), Off (North

American models)

Note

•Set to “On”, the Auto Standby function may activate itself during playback with some sources.

•The Auto Standby function does not work when Zone 2/3 is on.

Network

After modifying the network settings, you must confirm the changes by executing “Save”.

This section explains how to configure the AV receiver’s network settings manually.

If your router’s DHCP server is enabled, you don’t need to change any of these settings, as the AV receiver is set to use DHCP to configure itself automatically by default (i.e., DHCP is set to “Enable”). If, however, your router’s DHCP server is disabled (you’re for example using static IP), you’ll need to configure these settings yourself, in which case, a knowledge of Ethernet networking is essential.

What’s DHCP?

DHCP (Dynamic Host Configuration Protocol) is used by routers, computers, the AV receiver, and other devices to automatically configure themselves on a network.

Advanced Operations

What’s DNS?

The DNS (Domain Name System) translates domain names into IP addresses. For example, when you enter a domain name such as www.onkyousa.com in your Web browser, before accessing the site, your browser uses DNS to translate this into an IP address, in this case 63.148.251.142.

■MAC Address

This is the AV receiver’s MAC (Media Access Control) address. This address cannot be changed.

■DHCP

`Enable

`Disable

This setting determines whether or not the AV receiver uses DHCP to automatically configure its IP Address, Subnet Mask, Gateway, and DNS Server settings.

Note

•If you select “Disable”, you must configure the “IP Address”, “Subnet Mask”, “Gateway”, and “DNS Server” settings yourself.

■IP Address

`Class A:

“10.0.0.0” to “10.255.255.255”

`Class B:

“172.16.0.0” to “172.31.255.255”

`Class C:

“192.168.0.0” to “192.168.255.255”

Enter a static IP address provided by your Internet Service Provider (ISP).

Most routers use Class C IP addresses.

■Subnet Mask

Enter the subnet mask address provided by your ISP (typically 255.255.255.0).

■Gateway

Enter the gateway address provided by your ISP.

En-85

Page 84 Page 86
Page 85
Image 85
Onkyo TX-NR5010 instruction manual En-85, Auto Standby, Network, Dhcp
Page 84 Page 86

TX-NR5010 specifications

The Onkyo TX-NR5010 is a high-performance AV receiver that stands out in its class, designed for both dedicated home theater enthusiasts and casual listeners looking to enhance their audio experience. With a robust power output of 135 watts per channel, this receiver is well-equipped to drive a 7.2 channel surround sound system, delivering rich and immersive audio that brings movies, music, and games to life.

One of the key features of the TX-NR5010 is its support for the latest audio formats, including Dolby Atmos and DTS:X. These cutting-edge technologies create a three-dimensional sound environment that allows users to experience sound from every direction, effectively placing them in the heart of the action. For those who enjoy high-resolution audio, the TX-NR5010 supports FLAC, ALAC, and DSD files, ensuring that audiophiles can enjoy their music in the highest quality available.

In terms of connectivity, the TX-NR5010 is equipped with a wide array of inputs, including multiple HDMI ports with 4K upscaling capabilities. This allows users to connect various devices like Blu-ray players, gaming consoles, and media streaming boxes, while also ensuring compatibility with modern 4K televisions. Additionally, the receiver supports HDMI ARC, which simplifies the connection to a TV and enables seamless audio playback through the receiver.

The receiver is also integrated with advanced networking capabilities featuring Wi-Fi and Bluetooth support. This allows users to stream audio directly from their smartphones, tablets, or computers, making it incredibly convenient for those who enjoy listening to music from their digital libraries or popular streaming services like Spotify and TIDAL.

The Onkyo TX-NR5010 includes a sophisticated Equalization system that automatically calibrates the sound based on the room's acoustics using the AccuEQ Room Calibration technology. This ensures optimal audio performance and a perfectly balanced sound stage no matter where you are seated in the room.

In summary, the Onkyo TX-NR5010 combines powerful audio performance with advanced technology, making it a versatile choice for anyone looking to elevate their home theater experience. With support for the latest audio formats, extensive connectivity options, and innovative calibration features, the TX-NR5010 is a standout option for both casual listeners and home cinema aficionados looking for exceptional sound quality and versatility.
Top Page Image Contents