Onkyo TX-NR5010 instruction manual Playback, En-29, Playing the Connected Component

Playback

The on-screen information appears only on a TV that is connected to HDMI outputs. If your TV is connected to other video outputs, use the AV receiver’s display when changing settings.

This section describes the procedure for using the remote controller, unless otherwise specified.

Playing the Connected Component

■Operating with the remote controller

INPUT SELECTOR

RECEIVER

VOL q/w

Listening mode buttons

1 Press RECEIVER followed by an INPUT SELECTOR button.

2

3

4

Start playback on the source component.

See also:

•“Playing an iPod/iPhone via USB” (➔ page 31)

•“Playing a USB Device” (➔ page 32)

•“Listening to vTuner Internet Radio” (➔ page 32)

•“Registering Other Internet Radio” (➔ page 33)

•“Playing Music Files on a Server (DLNA)” (➔ page 34)

•“Remote Playback” (➔ page 35)

•“Playing Music Files on a Shared Folder” (➔ page 36)

•“Listening to AM/FM Radio” (➔ page 37)

•“Playing Audio and Video from Separate Sources” (➔ page 41)

•“iPod/iPhone Playback via Onkyo Dock” (➔ page 92)

•“Controlling Other Components” (➔ page 94)

To adjust the volume, use VOL q/w.

Select a listening mode and enjoy!

See also:

•“Using the Listening Modes” (➔ page 45)

•“Sound Program Edit” (➔ page 75)

Turning On & Basic Operations

■Operating on the AV receiver

Input selector buttons MASTER VOLUME

	LISTENING MODE
1	Use the input selector buttons to select the input
	source.
2	Start playback on the source component.
3	To adjust the volume, use the MASTER VOLUME
	control.
4	Select a listening mode and enjoy!

■Screen Saver

If there is no video signal on the current input source and no operation for a specific time (three minutes by default), a screen saver automatically comes on.

Tip

•The time until the screen saver activates itself can be changed in the “Screen Saver” setting (➔ page 83).

•The screen will return to its previous state if the AV receiver is operated.

En-29