Using Basic Functions

Using the Automatic Speaker Setup

With the supplied calibrated microphone,

Audyssey MultEQ® XT32 automatically determines the number of speakers connected, their size for purposes of bass management, optimum crossover frequencies to the subwoofer (if present), and distances from the primary listening position.

Audyssey MultEQ XT32 then removes the distortion caused by room acoustics by capturing room acoustical problems over the listening area in both the frequency and time domain. The result is clear, well-balanced sound for everyone. Audyssey MultEQ XT32 can be used with Audyssey Dynamic EQ® and

Audyssey Dynamic Volume® (page 76).

Before using this function, connect and position all of your speakers.

Audyssey MultEQ XT32 offers two ways of measuring: the “Audyssey Quick Start” and

Audyssey MultEQ XT32 Full Calibration”.

Audyssey Quick Start” uses the measurement from one position to perform the speaker setting only.

Audyssey MultEQ XT32 Full Calibration” uses the measurement from eight positions to correct room response in addition to the speaker setting.

The more positions are used in measuring, the better the listening environment will become. We recommend using a measurement from eight positions to create the best listening environment.

The Quick Start takes 2 minutes and Full Calibration takes about 20 minutes.

Total measurement time varies depending on the number of speakers.

Measurement procedure

To create a listening environment in your home theater that all listeners will enjoy, Audyssey MultEQ XT32 takes measurements at up to eight positions within the listening area. Position the microphone at ear height of a seated listener with the microphone tip pointed directly at the ceiling using a tripod. Do not hold the microphone in your hand during measurements as this will produce inaccurate results.

First measurement position

Also referred to as the Main Listening Position, this refers to the most central position where one would normally sit within the listening environment.

Audyssey MultEQ XT32 uses the measurements from this position to calculate speaker distance, level, polarity, and the optimum crossover value for the subwoofer.

Second-eighth measurement positions

These are the other listening positions (i.e., the places where the other listeners will sit). You can measure up to eight positions.

TV

d e f c a b

g h

: Listening area a to h: Listening position

Turning On & Basic Operations

Note

Make the room as quiet as possible. Background noise and Radio Frequency Interference (RFI) can disrupt the room measurements. Close windows, televisions, radios, air conditioners, fluorescent lights, home appliances, light dimmers, or other devices. Turn off the cell phone (even if it is not in use) or place it away from all audio electronics.

The microphone picks up test tones played through each speaker as Audyssey MultEQ XT32 Room Correction and Speaker Setup runs.

Audyssey MultEQ XT32 Room Correction and Speaker Setup cannot be performed while a pair of headphones is connected.

Audyssey MultEQ XT32 Room Correction and Speaker Setup can only be used with Speakers A. When you insert the speaker setup microphone with Speakers B selected, the speaker layout is automatically switched to Speakers A.

En-42

Page 42
Image 42
Onkyo TX-NR5010 instruction manual Using Basic Functions, En-42, Using the Automatic Speaker Setup, Measurement procedure

TX-NR5010 specifications

The Onkyo TX-NR5010 is a high-performance AV receiver that stands out in its class, designed for both dedicated home theater enthusiasts and casual listeners looking to enhance their audio experience. With a robust power output of 135 watts per channel, this receiver is well-equipped to drive a 7.2 channel surround sound system, delivering rich and immersive audio that brings movies, music, and games to life.

One of the key features of the TX-NR5010 is its support for the latest audio formats, including Dolby Atmos and DTS:X. These cutting-edge technologies create a three-dimensional sound environment that allows users to experience sound from every direction, effectively placing them in the heart of the action. For those who enjoy high-resolution audio, the TX-NR5010 supports FLAC, ALAC, and DSD files, ensuring that audiophiles can enjoy their music in the highest quality available.

In terms of connectivity, the TX-NR5010 is equipped with a wide array of inputs, including multiple HDMI ports with 4K upscaling capabilities. This allows users to connect various devices like Blu-ray players, gaming consoles, and media streaming boxes, while also ensuring compatibility with modern 4K televisions. Additionally, the receiver supports HDMI ARC, which simplifies the connection to a TV and enables seamless audio playback through the receiver.

The receiver is also integrated with advanced networking capabilities featuring Wi-Fi and Bluetooth support. This allows users to stream audio directly from their smartphones, tablets, or computers, making it incredibly convenient for those who enjoy listening to music from their digital libraries or popular streaming services like Spotify and TIDAL.

The Onkyo TX-NR5010 includes a sophisticated Equalization system that automatically calibrates the sound based on the room's acoustics using the AccuEQ Room Calibration technology. This ensures optimal audio performance and a perfectly balanced sound stage no matter where you are seated in the room.

In summary, the Onkyo TX-NR5010 combines powerful audio performance with advanced technology, making it a versatile choice for anyone looking to elevate their home theater experience. With support for the latest audio formats, extensive connectivity options, and innovative calibration features, the TX-NR5010 is a standout option for both casual listeners and home cinema aficionados looking for exceptional sound quality and versatility.