En

58

If the video source is connected to a composite video

16

input, your TV must be connected to the correspond-

 

ing composite video output.

 

If the video source is connected to an HDMI input,

15, 35

you must assign that input to an input selector, and

 

your TV must be connected to the HDMI OUT.

 

 

 

While the Pure Audio listening mode is selected, the

video circuitry is turned off and only video signals

 

input through HDMI IN can be output.

 

On your TV, make sure that the video input to which

the AV receiver is connected is selected.

 

There’s no picture from a source connected to an HDMI IN

Reliable operation with an HDMI-to-DVI adapter is 62 not guaranteed. In addition, video signals from a PC are not guaranteed.

The on-screen menus don’t appear

On your TV, make sure that the video input to which — the AV receiver is connected is selected.

When the AV receiver doesn’t connect TV with

HDMI, onscreen menus are not displayed.

 

 

 

Tuner

Reception is noisy, FM stereo reception is noisy, or the FM STEREO indicator doesn’t light

Relocate your antenna.

Move the AV receiver away from your TV or com-

puter.

 

Listen to the station in mono.

25

 

 

When listening to an AM station, operating the

remote controller may cause noise.

 

Passing cars and airplanes can cause interference.

 

 

Concrete walls weaken radio signals.

 

 

If nothing improves the reception, install an outdoor — antenna.

Remote Controller

The remote controller doesn’t work

Before operating this unit, be sure to press

RECEIVER.

 

 

 

Make sure that the batteries are installed with the

4

correct polarity.

 

Install new batteries. Don’t mix different types of

4

batteries, or old and new batteries.

 

 

 

Make sure that the remote controller is not too far

4

away from the AV receiver, and that there’s no

 

obstruction between the remote controller and the

 

AV receiver’s remote control sensor.

 

Make sure that the AV receiver is not subjected to

direct sunshine or inverter-type fluorescent lights.

 

Relocate if necessary.

 

 

 

If the AV receiver is installed in a rack or cabinet

with colored-glass doors, the remote controller may

 

not work reliably when the doors are closed.

 

Make sure you’ve selected the correct remote con-

9, 54

troller mode.

 

 

 

When using the remote controller to control other

manufacturers’ AV components, some buttons may

 

not work as expected.

 

 

 

Make sure you’ve entered the correct remote control

53

code.

 

 

 

Make sure to set the same ID on both the AV receiver

41

and remote controller.

 

 

 

Can’t control other components

If it’s an Onkyo component, make sure that the u

17

cable and analog audio cable are connected properly.

 

Connecting only an ucable won’t work.

 

 

 

Make sure you’ve selected the correct remote con-

9, 54

troller mode.

 

If you’ve connected an cassette tape deck, to the TV/

22

CD IN jack, or an RI Dock to the TV/CD IN or

 

GAME IN or VCR/DVR IN jacks, for the remote

 

controller to work properly, you must set the display.

 

 

 

If you cannot operate it, you will need to enter the

53

appropriate remote control code.

 

To control another manufacturer’s component, point

53

the remote controller at that component.

 

 

 

To control an Onkyo component that’s connected via

53

u, point the remote controller at the AV receiver.

 

Be sure to enter the appropriate remote control code

 

first.

 

To control an Onkyo component that’s not connected

53

via u, point the remote controller at the compo-

 

nent. Be sure to enter the appropriate remote control

 

code first.

 

 

 

The entered remote control code may not be correct.

If more than one code is listed, try each one.

 

 

 

UP-A1 Dock for iPod

There’s no sound

Make sure your iPod is actually playing.

Make sure your iPod is inserted properly in the

Dock.

 

Make sure the UP-A1 Dock is connected to the UNI-

VERSAL PORT jack on the AV receiver.

 

 

 

Make sure the AV receiver is turned on, the correct

input source is selected, and the volume is turned up.

 

Make sure the plugs are pushed in all the way.

 

 

Try resetting your iPod.

 

 

There’s no video

Make sure that your iPod’s TV OUT setting is set to — On.

Make sure the correct input is selected on your TV or — the AV receiver.

Some versions of the iPod do not output video.

The AV receiver’s remote controller doesn’t control your iPod

Make sure your iPod is properly inserted in the

Dock. If your iPod is in a case, it may not connect

 

properly to the Dock. Always remove your iPod

 

from the case before inserting it into the Dock.

 

The iPod cannot be operated while it’s displaying the — Apple logo.

Make sure you’ve selected the right remote mode. —

When you use the AV receiver’s remote controller, — point it toward your AV receiver.

Page 58
Image 58
Onkyo TX-SR508 There’s no picture from a source connected to an Hdmi, On-screen menus don’t appear, There’s no sound

TX-SR508 specifications

The Onkyo TX-SR508 is a versatile home theater receiver designed for audiophiles looking to enhance their audio-visual experience. This model stands out in its class due to its combination of advanced features, high-quality build, and user-friendly operation.

One of the primary features of the TX-SR508 is its capability to decode multiple high-definition audio formats. Supporting Dolby TrueHD and DTS-HD Master Audio, the receiver ensures that users enjoy a cinematic sound experience, delivering a clear and immersive audio performance. Additionally, it offers Dolby Pro Logic IIz, which enhances the surround sound experience by adding front height channels, enriching the overall soundstage.

The TX-SR508 is equipped with a powerful amplifier that provides 75 watts per channel across seven channels, ensuring that it can adequately drive a full home theater speaker setup. With impedance options of 4 to 16 ohms, it is versatile enough to work with a variety of speaker systems.

Connectivity is another strong suit of the Onkyo TX-SR508. It features multiple HDMI inputs, enabling users to connect various high-definition devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI 1.4a standard used in this receiver supports 3D video pass-through, making it future-proof for the current generation of home theater setups.

For those who still enjoy traditional sources, it includes analog audio inputs, as well as a phono input for connecting a turntable, catering to vinyl enthusiasts. The built-in AM/FM tuner and the capability to connect to an external internet radio enrich the listening options available to users.

Integrated technologies such as Audyssey 2EQ speaker calibration assist in optimizing sound for the room environment, providing a balanced audio experience regardless of the room's acoustics. The receiver also boasts an intuitive graphical user interface, making setup and navigation straightforward for users of all levels.

Overall, the Onkyo TX-SR508 combines cutting-edge audio technologies, extensive connectivity options, and practical features, making it a solid choice for anyone looking to build or upgrade their home theater system. Whether enjoying a movie, gaming, or listening to music, the TX-SR508 ensures an impressive performance, grounded in both quality and versatility.