Onkyo TXNR525 instruction manual En-14, Connecting the TV/AV components

Connections

Connecting the TV/AV components Connections

Before connecting the power cord, connect all of your speakers and AV components. To display the setup menu on the TV screen, connecting the TV to the HDMI OUT is required.

E I F G H D C B A

AUse this jack to connect to the HDMI input of the TV. If your TV doesn’t support Audio Return Channel (ARC)*1, you need to connect an optical digital cable together with the HDMI cable to jack

E.

*1 ARC is the function that carries the audio signal from the TV to jack A. With ARC, a single HDMI cable can connect the TV and the AV receiver.

BUse this jack to connect to your Blu-ray Disc/DVD player, etc.

CUse this jack to connect to the Satellite/cable set- top box, etc.

DUse this jack to connect to the game consoles, etc.

FUse this port to connect to a LAN port on a router so the AV receiver can be connected to your home network.

If you select the input selector button, the signal from the component connected to the assigned jack is played.

			Input
			selector
B	C	D	buttons

•Before making any AV connections, read the manuals supplied with your AV components.

•Push plugs in all the way to make good connections (loose connections can cause noise or malfunctions).

•To prevent interference, keep audio and video cables away from power cords and speaker cables.

GUse jack and terminal here to connect the supplied FM antenna and AM loop antenna.

HUse this jack to make connections using an analog audio cable.

With this connection, you can also enjoy analog audio from external components while you are in Zone 2.

IUse this jack to make connections using a component video cable.

Tip

•To listen to the audio of a component connected via HDMI through your TV’s speakers, enable “HDMI Through” (➔ page 53) and set the AV receiver to standby mode.

•In the case of Blu-ray Disc/DVD players, if no sound is output despite following the above-mentioned procedure, set your Blu-ray Disc/DVD player’s HDMI audio settings to PCM.

En-14