Onkyo TXNR525 instruction manual En-38

Listening Mode			Description	Input	Speaker
				Source	Layout
Dolby Pro Logic II			Dolby Pro Logic II expands any 2-
			channel source for 5.1-channel
			playback. It provides a very natural and
			seamless surround-sound experience
			that fully envelops the listener. As well
			as music and movies, video games can
			also benefit from the dramatic spatial
			effects and vivid imaging.
			• Dolby PLII Movie	S	XC
	P L	M o v i e
			Use this mode with DVDs and videos
			that bear the Dolby Surround logo or
	P L	M u s i c
			TV shows that feature Dolby Surround.
			You can also use this mode with stereo
	P L	G a m e
			movies or TV shows and the AV
			receiver will create a 5.1 surround mix
			from the 2-channel stereo.
			• Dolby PLII Music
			Use this mode to add 5.1 surround to
			stereo sources such as music CDs and
			DVDs.
			• Dolby PLII Game
			Use this mode when playing game
			discs.
DTS Neo:6			This mode expands any 2-channel
			source for up to 5.1-channel playback. It
			uses seven full-bandwidth channels of
			matrix decoding for matrix-encoded
			material, providing a very natural and
			seamless surround sound experience
			that fully envelops the listener.
			• DTS Neo:6 Cinema	S	XC
	N e o : 6 C i n e m a
			Use this mode with any stereo movie
			(e.g., TV, DVD, VHS).
	N e o : 6 M u s i c
			• DTS Neo:6 Music
			Use this mode with any stereo music
			source (e.g., CD, radio, cassette, TV,
			VHS, DVD).

Playback

Note

*1 (North American and Taiwanese models) This listening mode is not available.

*2 Pure Audio cannot be selected when Zone 2 is active.

Besides, if you activate Zone 2 while Pure Audio is selected, the listening mode will automatically switch to Direct.

*3 The AV receiver can input the DSD signal from HDMI IN. Depending on the player, setting the output on the player side to PCM might bring better sound.

*4 For the Blu-ray Discs, Dolby Digital is used.

*5 DTS is used depending on the configuration of the AV receiver.

The listening mode may not be selected depending on the input signal. The signal input from the external AV components can be displayed by the function on the next page.

En-38