Dubbing a Cassette Tape
You can dub at the tape’s normal play- ing speed or at twice the normal speed. If you dub at normal speed, you can listen as you record.
1.Press TAPE.
2.Load the
3.Load a blank cassette (or one you want to record over) into TAPE 2 with the side you want to record on facing you.
4.Set DUBBING to NORMAL or HIGH.
(il-
•Set DUBBING to NORMAL to dub at normal speed. This pro- duces the highest quality results.
•Set DUBBING to HIGH to dub at approximately twice the normal speed. This produces the fast- est results, but the quality is slightly reduced.
18
5.Press PAUSE and RECORD on TAPE 2. Both PAUSE and RECORD lock down.
6.Press PLAY on TAPE 1. TAPE 1 begins playback, PAUSE releases on TAPE 2, and dubbing begins.
Notes:
•To skip an unwanted section on TAPE 1, press PAUSE on TAPE 2 while the unwanted section plays. To resume dubbing, press PAUSE again.
•To monitor the tape you are copying, adjust VOLUME.
Dubbing automatically stops when the cassette in TAPE 2 reaches its end.
If the cassette in TAPE 1 continues to play, press STOP/EJECT. To stop dub- bing before TAPE 2 stops automati- cally, press STOP/EJECT on both cassette compartments.