Installing the Utilities on a ProDOS 8 System Disk:

To install the RamPak Utilities on any ProDOS 8 System Disk, use the Apple IIGS Desktop or your own copy utility to copy the file “Cache.System’ from the RamPak Utilities disk as the first ‘system” file on your ProDOS 8 system disk. The “Cache. System” file must be the first “system’ file on your ProDOS 8 system disk.

STARTUP PROCEDURES USING SYSTEM DISKS WITH RAMPAK UTILITIES INSTALLED

To use your RamPak Utilities after you have installed them on either a ProDOS 8 or ProDOS 16 system disk, just reboot your Apple IIGS with the appropriate system disk and run your application.

NOTE: If you are using the Pro DOS 8 version of the utilities, you will be asked to enter the path name of the next application after the cache utility has loaded. At this time press the carriage return key, then enter the name of your application.

The RamPak Utilities are now installed as an Apple IIGS Classic Desk Accessory, accessible virtually any time you are computing. To access the RamPak utilities, type CONTROL-—ESC. This is done by first pressing the CONTROL key, holding it down, and pressing the and ESC keys at the same time. This is the standard procedure for entering the Apple IIGS Desk Accessory Menu. You will note that “RamPak Utilities” is listed as one of the selections. Using the UP and DOWN arrow keys, you will see a highlight bar moving within the menu. Highlight (or select) “RamPak Utilities” and hit RETURN. You will soon be presented with the RamPak Memory Management Utilities menu screen, from which you can utilitize the full power of the RamPak 4GS.

You may view the settings and statistics on the RamPak utilities at any time within the Desk Accessory

10