menu, but the disk containing the RamPak Utilities file must be in the drive in order to change settings.

How to Use Pull-down Menus

When you first enter the menu screen, you will see a bar across the top of the screen with several titles. These are your menu titles. Under each of these is a menu, which contains one or more selections. Some selections will open a dialog box, which will provide additional selections or allow the entry of data.

1. OPENING A MENU

Use the mouse to point at the desired menu. Then press the mouse button (click) and hold. You will now see the available menu selections. You may now make your selection, as explained below.

2. MAKING SELECTIONS FROM A MENU

Still holding down the mouse button, “drag” the arrow to the desired menu selection. Then release the button. This procedure, combined with 1 above, is called “clicking and dragging’. Either a selection has been made, or a dialog box has been opened.

3.SETTINGS WITHIN A DIALOG BOX

For ON/OFF or YES/NO settings, point and click on the box in front of the selection. For settings where data must be entered, press the tab key and then use the keyboard to enter the data.

4.CLOSING THE DIALOG BOX

Point and click on the “CLOSE” box or the “OK” box. This will return you to the menu screen.

5.CLOSING THE MENU

Menu is automatically closed except when dragging to a menu selection.

6.EXITING TO ProDOS

Use above procedure to select either Done--Install Changes or Undo All Changes menu.

11