3.Touch the power supply of the Apple IIGS before handling the RamPak 4GS. Static charges may damage your RAM or other delicate electronic parts.

4.If you have purchased additional RAM for the Ram Pak, this must be installed before the RamPak is installed in your Apple. Turn ahead to ‘Installing RAM Chips in the RamPak 4GS on page 5, follow the instructions, and return to step 5 below.

5.Locate the memory expansion slot. You will notice that the IIGS contains a row of seven expansion slots, with an eighth slot set out-of-line at the far right front of the machine. This eighth slot is the memory expansion slot to be used by the RamPak 4GS.

MEMORY EXPANSION SLOT

6.The Ram Pak 4GS must be installed with the sloped end of the card nearest the front of the IIGS. (The card is designed with a slope for users who have upgraded from an Apple lIe, retaining their original system enclosure). With the card so positioned, place the ‘RamPak 4GS directly into the memory expansion slot and press down with a firm rocking motion. Continue until the card is firmly seated.

7.Replace the Apple IIGS cover.

8.Re-attach any disconnected power and peripherals.

4