EN

PC System requirements

 

 

The minimum system requirements for use of the “Virtual

 

 

Weather Station” software is:

 

• Operating system: Microsoft Windows 98 or above

 

• Processor: Pentium II 166Mhz or above

 

• RAM: Min. 64Mb

 

• Hard disk free space: Min. 30Mb

 

To connect the base station to the computer:

 

3

 

2

1

1.Uncover the USB point on the side of the base station.

2.Plug in the USB cable.

3.Plug in the other end of the cable in the computer.

BACKLIGHT

Press any button or rotate the dial to activate the backlight.

RESET

Press RESET to return to the default settings.

ACCESSORIES – SENSORS

This product can work with up to 10 sensors at any one time to capture outdoor temperature, relative humidity or UV readings in various locations. Optional wireless remote sensors such as those listed below can be purchased separately. For more information, please contact your local retailer.

•Thermo-hygro THGR800 (3-Ch)

•Thermo-hygro THGR810 (10-Ch)

•UV UVN800

TROUBLESHOOTING

PROBLEM

SYMPTOM

REMEDY

Barometer

Strange

Set unit

 

readings

 

 

 

 

Ca endar

Strange date /

Change

 

month

language

 

 

 

Clock

Cannot adjust

Disable radio-

 

clock

controlled clock

 

 

 

 

Cannot auto-

1. Adjust

 

synch

batteries

 

 

2. Press RESET

 

 

3. Manually

 

 

activate radio-

 

 

controlled

 

 

clock

PROBLEM

SYMPTOM

REMEDY

Temp

S hows “LLL” or

Temperature is

 

“HHH”

out-of-range

 

 

 

 

Remote

Cannot locate

1.

Check

sensor

remote sensor

 

batteries

 

 

2.

Check if

 

 

 

sensors are

 

 

 

within range

 

 

 

 

PRECAUTIONS

This unit is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions:

•Placement of this product on wood surfaces with certain types of fi nishes, such as clear varnish, may result in damage to the fi nish. Consult the furniture manufacturer’s care instructions for direction as to the types of objects that may safely be placed on the wood surface. Oregon Scientifi c shall not be responsible for any damage to wood surfaces from contact with this product.

•Do not cover the ventilation holes. Make sure items that are nearby such as newspapers, tablecloths, curtains etc cannot accidentally cover the ventilation holes.

•Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.

•Do not clean the unit with abrasive or corrosive materials. This may scratch the plastic parts and corrode the electronic circuit.

•Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts.

•This product may malfunction if electrostatic discharge or radio interference appears in the environment and / or affects the ac power line. The unit will revert to normal operation when interference stops.

•Do not tamper with the unit’s internal components. Doing so will invalidate the warranty on the unit and may cause unnecessary damage. The unit contains no user-serviceable parts.

•Only use fresh batteries as specifi ed in the user’s instructions. Do not mix new and old batteries as the old ones may leak.

•Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.

•Due to printing limitations, the displays shown in this manual may differ from the actual display.

•The contents of this manual may not be reproduced without the permission of the manufacturer.

NOTE The technical specifi cations for this product and the contents of the user manual are subject to change without notice.

12