EN

CLOCK / CALENDAR

To manually set the clock:

(You only need to set the clock and calendar if you have disabled the clock radio reception.)

1.Press SELECT to navigate to the Clock Area. will show next to the Area.

2.Press and hold MODE to change the clock setting. The setting will blink.

3.Rotate the dial left or right to decrease or increase the setting value.

4.Press MODE to confi rm.

5.Repeat steps 1 to 5 to set the time zone offset hour (+ / -23 hours), 12 / 24 hour format, hour, minute, year, date / month format, month, date and weekday language.

NOTE If you enter +1 in the time zone setting, this will give you your regional time plus 1 hour.

NOTE The weekday is available in English, French, German, Italian or Spanish.

To change the clock display:

1.Press SELECT to navigate to the Clock Area. will show next to the Area.

2.Press MODE to toggle between:

•Clock with Seconds

•Clock with Weekday

•Calendar

To activate / deactivate an alarm:

1.Press SELECT to navigate to the Clock Area. will show next to the Area.

2.Press ALARM to toggle between alarm 1 and alarm 2

3. Press MEMORY /

to activate or

deactivate the alarm.

appears when the

alarm is activated.

 

MOON PHASE

The Calendar must be set for this feature to work (see Clock / Calendar section).

ICON DESCRIPTION

New moon

Waxing crescent

First quarter

Waxing gibbous

Ful l moon

Waning gibbous

Th ird quarter

Waning crescent

CLOCK ALARM

The clock has 2 alarms that can be set to sound with a beep.

ICON

MEANING

 

 

Alarm 1 or 2 is displayed

 

 

 

 

 

 

 

 

 

Alarm 1 or 2 is activated

 

 

No icons

No alarm is set

 

 

 

To set an alarm:

1.Press SELECT to navigate to the Clock Area. will show next to the Area.

2.Press ALARM to toggle between alarm 1 alarm 2 display.

3.When you’ve selected the alarm you wish to change, press and hold ALARM . The alarm setting will blink.

4.Rotate the dial left or right to change the setting.

5.Press ALARM to confi rm.

8

AUTO SCANNING FUNCTION

To activate the outdoor temperature and humidity auto-scan function:

1.Press SELECT to navigate to the Temperature or Humidity Area. will show next to the Area.

2.Press and hold MODE to activate auto-scan. The temperature and humidity display will scroll from indoor to ch1 through to ch10.

3.Press MEMORY / ON/OFF or MODE or ALARM to stop the auto-scan.

NOTE Channel 1 is used for the outdoor temperature and humidity sensor in the remote wind sensor. Additional temperature and humidity sensors can use other channels.

WEATHER FORECAST

The weather display in the top part of the screen shows the current weather and the weather forecast for the next

12-24 hours within a 30-50 km (19-31 mile) radius.

Weather Forecast Area

ICON DESCRIPTION

Sun ny

Partly cloudy