EN |
| Humidity / Dew Point Area |
|
|
1
2
3
4
5
6
1.Dew point level - Temperature is showing
2.HI / LO humidity and Dew Point alarms are set
3.Comfort levels
4.Humidity trend
5.MAX / MIN humidity
6.Humidity reading
WIND SENSOR
1
5
2
6
3
4
1.Wind vane measuring the wind speed
2.Wind direction sensor
3.Battery compartment
4.RESET hole
5.North indicator
6.Plastic sleeve protecting the batteries
RAIN GAUGE
Base and funnel
1 | 2 | |
3 | ||
|
1.Rain gauge
2.Battery compartment
3.RESET button
Tipping bucket rain gauge
1
2
1.Funnel
2.Level indicator
GETTING STARTED
SET UP REMOTE WIND SENSOR
The wind sensor can take 3 readings:
•The wind speed and directions
•The outdoor temperature (Channel 1 only)
•The outdoor relative humidity (Channel 1 only)
The sensor is battery operated and is capable of transmitting data to the base station wirelessly within an approximate operating range of 100 meters (328 feet).
NOTE For best results, ensure that the wind direction indicator on the wind sensor points to the North to enable an accurate reading. The sensor also should be positioned in an open area away from trees or other obstructions.
To set up the wind sensor main body on the steel pole:
1.Assemble the wind direction pointer on the top of the wind sensor.
2.Use the screw (Type B) to fi x.
3.Assemble the wind vanes on the top of the wind pointer.
4.Use the screw (Type B) to fi x.
3 4
12
5.Hold the wind sensor upright and rotate the protective sleeve to the left to unlock.
4