21
uSING ThE REdIAL LIST uSING ThE CALL LOGUsing the call log
To receive Caller ID you may need to contact your
telephoneserviceprovider,andtheywillinformyoualso
of any charges for it. Caller ID lets you see the phone
numbersofyourcallerson thehandsetdisplay,before
you answer and in your Call Log afterwards. The Call
Logstoresthelast10externalcalls,whetherornotyou
answeredthecall,soyoucancallthembacklater.
Onlythemostrecentcallissaved iftherearerepeat
callsfromthesame number.WhentheCall Logis
full,thenextnewcallwillreplacetheoldestentry.
Ifyou'vegota newcallinthe CallLog,theCaller
Display icon will appear on the handset display.
Ifthereceivednumber isthesameas oneinyour
phonebook,thenamefrom thephonebookwill
displayaswellasthenumber.
Ifacallisfromsomeone whowithheldtheirnumber,
thedisplaywillshowWITHHOLDID.
Ifthecallisfromsomeonewhosenumberisunavailable,
orifyouhave notsubscribedtoCaller IDbuthaveset
thedateandtime,the displaywillshowCALLINGwhen
itisreceivedandUNAVAILABLEintheCallLog.
Access call log
PressCALLLOG(UP) keyinstandbymode and
press Navigationkeyto browsethecalllist. The
calls are displayed in chronological order with the
most recent call at the top of the list.
1. Press
OKkeytodisplay moredetailsofthe
call,includingthedateandtime.
Savecalllistentryintothephonebook
2. Press
CALL LOG(UP)keyinstandby mode
to go to the call list.
3. Press the Navigation keytoselectan entry
and then press MENUkey.
4.Press theNavigationkeyto selectSAVE
NUMBERandthenpressOKkeytoselect.
(Enter the name of the contact (maximum 12
characters) and then press OKkeytoconrm.
Delete a Call Log entry
1. Press
CALL LOG(UP)keyinstandby mode
to go to the call list.
2. Press the Navigation keytoselectan entry
and then press MENUkey.
3. Press the Navigation keytoselectDELETE
and then press OKkeytoselect.
(Press
OKkeyagaintoconrm.Aconrmation
beepisplayed.)
Delete all entries in the Call Log
1. Press
CALL LOG(UP)keyinstandby mode
to go to the call list.
2. Press the MENUkey.
3. Press the Navigation keytoselectDELETE
ALL and then press OKkeytoselect.
(Press
OKkeyagaintoconrm.Aconrmation
beepisplayed.)