28 AdvANCEd uSE OF YOuR TELEPhONE
2. Press the NavigationkeytoselectADVANCED
SET and then press OKkeytoselect.
3. Press the Navigationkey toselectFIRST
RINGandthenpressOKkeytoselect.
4.Press theNavigationkeyto selectONor
OFFandthenpress OKkeytoconfirm.A
conrmationbeepisplayed.
Reset unit
Youcanresetyourphone toitsdefaultsettingswith
this feature.
1. Press
MENUkeytoentermenuselection.
2. Press the Navigationkeytoselect
ADVANCEDSETandthen pressOKkeyto
select.
3. Press the Navigation keytoselectRESET
and then press OKkeytoselect.
4.PressOKkeyagainto confirm.A
confirmationbeepisplayed andtheunitis
reset to its default settings.
Fornumbersstartingwith*,#orP,theprexnumber
willnotbeaddedtothe
Pre-dialnumberafterTALKkeyispressed.
Change recall time
Youmayneedthe Rbuttontosenda Recallsignal
ifyouareconnected toaPBX.Youshould normally
leave the Recall Time at its default setting of Short
(100ms),asthisis thestandardrecallrequired in
thetelephonenetwork,but itcanbechangedto
Medium (270ms) or Long (600ms) if your telephone is
connectedtoaPBXthatrequiresadifferentrecalltime.
1. Press
MENUkeytoentermenuselection.
2. Press the Navigationkeytoselect
ADVANCEDSETandthen pressOKkeyto
select.
3. Press the Navigation keytoselectRECALL
TIME and then press OKkeytoselect.
4. PresstheNavigationkey toselectSHORT,
MEDIUMorLONGandthenpressOKkeyto
conrm.Aconrmationbeepisplayed.
Set first ring
Whenthisfunctionis settoOff,thefirst ringfrom
an incoming call will not sound. This is useful on
exchanges where calling line identity is sent after the
rstring.
1. Press
MENUkeytoentermenuselection.
Note:
Uponreset,allyourpersonalsettings,calllogand
rediallistentrieswill bedeletedandthephone
willreturntoits defaultsettings.However,your
phonebookwillremainunchanged afterreset.
Also,ifyouhave anansweringmachinemodel,
anyrecordedmessageswill remainunchanged,
butallothersettingswillbedefaulted.