ANSWERING MACHINE OPERATION

Answering machine Ring delay Setting

This setting is used to set the ring times.

Default number of ring -3

1. Press and hold 2-9/GS key (bottom of base) for 2 seconds.

Set rings” will be heard followed by a short beep, after a pause then prompt current rings.

2. Press

ANS

or

MEMO

key to select item. Voice prompt at each selection will be

heard. There are 2-9 and TS mode (Toll saver) for you to select.

3. Press 2-9/GS key to confirm setting and go back to standby or off mode.

Answering machine PIN number Setting

Default code - 000

1. Press and hold CODE key (bottom of base) for 2 seconds. “Set security code” can be heard followed by a short beep, after a pause then prompt the first code.

2. Press

ANS

or

MEMO

key to select the first digit. Voice prompt at each selection

will be heard.

3. Press CODE key located on the bottom of the base (see page 10) to confirm setting and go to next setting. The voice prompt will be heard.

4. Press

ANS

or

MEMO

key to select the second digit. Voice prompt at each

selection will be heard.

5. Press CODE key to confirm setting and go to next setting. The voice prompt will be heard.

6. Press

ANS

or

MEMO

key to select the third digit. Voice prompt at each

selection will be heard.

7. Press CODE key to confirm setting and go back to standby or off mode.

Note: Press key any time or 5 seconds without any operation will quit setting mode and will go back to standby or off mode. All settings are unchanged.

29

Page 31
Image 31
Oricom M5200 Series manual Answering machine Ring delay Setting, Answering machine PIN number Setting