OGM Outgoing Messages, OGM setting | Oricom M5200 Series specification

ANSWERING MACHINE OPERATION

OGM (Outgoing Messages)

M5200 has two OGM message modes:

OGM1 (Announcement One) mode:

Callers can hear a pre-recorded message “Please leave a message after the beep” and the unit records the caller's message.

OGM2 (Announcement Two) mode:

Callers can hear the other pre-recorded message “Please call later”. Under this mode, the caller will NOT have the opportunity to leave a message.

You can also record your own personalized greeting (from 3 seconds to 120 seconds).

Note: The default setting is OGM1 (Announcement One).

OGM setting

Press key to switch between OGM1 and OGM2.

Record OGM

1. Press key to select OGM1 mode or OGM2 mode.

2. Press and hold ANS key until you hear a long beep and see light ﬂash.

3. Speak into the microphone (15cm from the base unit’s microphone).

4. Press key to stop recording, the machine will play back recording for review.

Note: If the OGM is less than 3 seconds, it is not valid. The machine will stop automatically after 2 minutes.

30

Image 32

Oricom M5200 Series OGM Outgoing Messages, OGM1 Announcement One mode, OGM2 Announcement Two mode, OGM setting, Record OGM

Contents

User Guide Keep this user guide for future reference Customer Support Contents Caller ID Operation …………………………………………………………… Answering Machine Operation ……………………………………………… Adaptor for Charger Installation and Charger Getting StartedTip Important do YOU have BOADBAND/ADSL? Pack contents Purchasing additional handsets Your cordless handset Understanding the cordless handset display Keypad lock Right Arrow / Message waiting Your M5200 base unit Bottom GS Answering Machine Rings Code Answering Machine PIN Answering an incoming call Basic OperationDuring standby Mute feature Making an external callNormal dialling Pre-dialling Take two different calls at the same time Recall featureCall waiting Recall function when connected to a Pabx Pause feature when using on a PabxHandsfree mode Volume adjustment with base unit Volume adjustment with handsetSpeaker volume control Ringer volume control Store a CID number Caller ID OperationReview Caller ID records Delete one or all CID records Delete all viewed CID records LNR Function Last Number Redial Redial the last number Store the last number dialled Delete last number dialled Review / Edit / Dial stored Phonebook records PhonebookAdd new records Delete one record John Handset ringer adjustment Handset ringer volumeCordless Handset Operation Handset ringer melody Multi-handset Operation Intercom function Call transfer between cordless handsets Register new handsets on the M5200 base Cordless handset keypad lockRegistration PIN ? Remove handsets Reset Handset name Answering machine On / Off Day/Time settingAnswering Machine Operation Answering machine Ring delay Setting Answering machine PIN number Setting OGM1 Announcement One mode OGM2 Announcement Two modeOGM setting OGM Outgoing Messages OGM play to line Play OGMDelete OGM Play ICM ICM Incoming MessagesRecord ICM Memo Delete messagesRecord memo Play memo Memory full Delete all messagesPage Remote operation keys Call screeningCordless handset detection Toll saver Remote turn-on Troubleshooting Appendix Keypad does Product Speciﬁcations Phone Oricom M5200 Speciﬁcations Exclusion and limitation of liability Warranty InformationWarranty Customer Support