Oricom M5200 Series manual Multi-handset Operation, Intercom function

CORDLESS HANDSET OPERATION

Multi-handset Operation

Your M5200 series phone can have up to 4 handsets registered to the base unit. Each handset has its own number HS-1, HS-2, HS-3 and HS-4 shown on the left-hand side of the display. With 2 or more handsets you can:

•Make intercom calls while on an external call

•Switch between an external call and intercom call

•Transfer an external call from one handset to another

•Set a 3-way conference call between yourself, an external call and intercom call

Note:

•A maximum of 1x external call and 2x intercom calls can take place at the same time.

•If you make an external call + another handset is on line = result in a busy tone.

•You can make an intercom call when the other handset is in progress.

Intercom function

To make an intercom call,

1. Press INT key, during standby mode. The display on the right is shown.

2. Key the handset number (1, 2, 3, or 4) you wish to call.

When there is an intercom call, the display on the right is shown.

1. Press or INT key to answer the intercom call.

2. Press or INT key again to end the call.

Depicts Handset-2 calling

23