Nikon Nikon N75 instruction manual or Vari-Program except 1iiiiiI. ~ or ~, P or a exposure mode

Using Built-In Speedlight-continued

•If IiiiiiI or ~ is set when the built-in Speedlight is in the up position , flash is automatically canceled .

•Multi-Sensor Balanced Fill-Flash is selected in exposure modes other than M and Standard TTL Flash is selected for M exposure mode. See page 91 for details.

•See the table on pages 97, 98 and 99 for shutter speed and aperture, available sync mode in each exposure mode.

•In P, S, A or M exposure mode, selected flash sync mode remains once it is set. To change the flash sync mode, rotate the Command Dial while pressing the 0 button to select another flash sync mode.

•In '8' or Vari-Program, turning the power switch off or selecting another exposure mode cancels the selected flash sync mode and returns to its initial setting (page 99).

•Rotating the Command Dial while pressing the 0 button changes the display as follows .

In '8' or Vari-Program (except 1iiiiiI. ~ or ~):

B~ - l~l +-+~'1

t,

In ~:

~l- ~'~~l

t,

In P or A exposure mode:

~	-. LJ~	-. ~~SLOW	~~SLOW	Q~ ' 2
[j				REAR
t				,

In S or M exposure mode:

'1 ($l cannot be set when the built-in Speedlight is up.

'2 The display changes to Q when you leave your finger from the 0 button.

96