Install Batteries and Check Battery Power

.Use...two...CR2...-type...3V...lithium....batteries.................................

Turn the power switch off and open the battery chamber

1 cover by sliding the battery chamber cover lock release lever toward indicated direction.

When replacing batteries, be sure to turn the power switch off and replace both batteries at the same time. Always use fresh batteries of the same brand .

NOTE: Storing batteries

Keep the batteries out of children's reach . If swallowed, contact a doctor immediately. (For "Notes on Batteries", see page 116.)

2 Insert batteries with the Ee and e ends positioned as marked inside the battery chamber, then firmly close the battery chamber cover.

Make sure to firmly close the battery chamber cover until it locks into place.

Incorrect positioning of EB and e poles may damage the camera.

Check points

We recommend that you take spare batteries with you , especially when travelling .

For the number of film rolls that can be shot with fresh batteries, see page 128.

16

Page 16
Image 16
Nikon Nikon N75 instruction manual Install Batteries and Check Battery Power, Check points