Using Built-In Speedlight

This section explains how to use the built-in Speedlight set to desired flash

sync mode when a G- or O-type AF Nikkor lens is attached .

.....................................................

1 In P, S, A or M exposure mode, release the built-in Speed light by pressing the 0 flash lock-release button. In

Wor Vari-Program (except in ii or ~), when the subject is dark or backlit and the shutter release button is lightly pressed , the built-in Speedlight automatically pops up.

In P, S, A or M exposure mode

In A~ or Vari -Program

 

(except ~ or ~)

i

I

When the subject is dark or backlit and shutter release button is lightly pressed, the flash recommended indication ~ blinks in the viewfinder in P, S, A or M exposure mode. To use built-in Speedlight, press the 0 flash lock-release button.

In ~, :l or .:r.,8 is displayed in the LCD panel ; in r::J , ~ is displayed.

When the Speedlight is ready to fire, ~ appears without blinking in the viewfinder (when the camera's meter is on).

Press the Speedlight down gently until it clicks into place to retract it.

2 Set the flash sync mode by rotating the Command Dial while pressing the 0 flash sync button.

95

Page 95
Image 95
Nikon Nikon N75 instruction manual P, S, a or M exposure mode, Except ~ or ~