Nikon Nikon N75 instruction manual

Auto Exposure Bracketing-continued

•If the Exposure Compensation function (page 64) is also set, bracketing will be combined with the Exposure Compensation values. It is useful to perform Bracketing with a compensated value of over +2 EV or under -2 EV (maximum of ±S EV).

•If the end of the film roll is reached during bracketing, the remaining shots can be taken after new film has been loaded. Also, if you turn the power switch off during bracketing, the remaining shots can be taken after the power is turned back on.

Electronic analog exposure display (Example: bracketing value 1.0, in A mode)

First shot (correct EV)

Second shot (under EV)

Third shot (over EV)

3 Auto Exposure Bracketing is completed and automatically canceled when the third shot is taken.

•rn:H and ~ in the LCD panel and ~ and the electronic analog exposure display in the viewfinder disappear when the bracketing is completed.

•To cancel the bracketing, rotate the Command Dial while pressing the e button so rn:H disappears from the LCD panel. Turning the power switch off does not cancel bracketing .

Check points

•Auto Exposure Bracketing cannot be performed in A8 and Vari-Program .

•Auto Exposure Bracketing and Multiple Exposure (page 69) cannot be set simultaneously.

•Auto Exposure Bracketing and Long Time exposure (page 62) cannot be set simultaneously.

68