Nikon Nikon N75 instruction manual Film Rewind, Mid- roll rewind

Film Rewind

This section explains mid-roll rewind and what to do if the film does not

.rewind....................................... .............

Mid- roll rewind

•To rewind film at mid-roll, press the two film rewind El~ buttons simultaneously for approx. 1 sec.

Shutter sound is let out and film rewind will start.

·0 ___ , 0 __ , 0 _ and then 0 appear in the LCD panel

during film rewind and the frame counter counts backwards until rewind is complete.

•Film is completely rewound when a blinking E shows in the LCD panel and 8 in the viewfinder. (E appears without blinking and 8 disappears when the exposure meter is off.) Make sure E and 8 are blinking, open the camera back away from sunlight and remove the film cartridge.

If film does not start to rewind or film rewind stops at mid-roll

•When battery power is very low, or at low temperatures, film may not start rewinding or film rewind may stop at mid-roll, and 0 __ , frame number and insufficient battery power indication C-.Jwill blink in the LCD panel, and 8 _ and CA!I will blink in the viewfinder. In this case, turn the power switch off, change batteries, then turn the power switch on to rewind film again. (The frame counter display does not change until camera back is opened once and closed again after removing the film cartridge.)

~i! : Warning indications in the viewfinder can be set not to appear (p. 74).

78