*1 Metering system automatically switches to Center-Weighted Metering when the exposure mode is set to Manual.
*2 IX-Nikkor lenses cannot be attached.
*3 This camera is compatible with the Vibration Reduction function of the VR Nikkor lens.
*4 The camera's exposure metering and flash control system do not work properly when shifting andlor tilting the lens, or when using an aperture other than the maximum aperture.
*5 Without shifting andlor tilting the lens.
*6 Compatible with AF-S and AF-I Nikkor except AF-S 17-35mm f12.80 IF-ED, AF-S 24-85mm fI3.5-4.56 IF-ED and AF-S 28-70mm f12.80 IF-ED.
*7 With maximum effective aperture of f15.6 or faster
*8 With maximum aperture of f15.6 or faster
*9 Some lenses/accessories cannot be attached. (See page 106.)
*10 With exposure mode set to Manual. The exposure meter cannot be used.
*11 With exposure mode set to Manual and shutter speed set to 1190 sec. or slower, the exposure meter cannot be used.
*12 Attach the PB-6 vertically. (PB-6 can be set to horizontal position after attaching.)
•When using AF-S VR Nikkor lens, it is recommended that you carry spare batteries and change them frequently.
•AS-15 must be attached in combination with Medical-Nikkor 200mm f/5. 6 for the lens to fire the flash.
•Reprocopy Outfit PF-4 can be attached in combination with Camera Holder PA-4.
CPU contacts of CPU | G-type Nikkor lens | D-type Nikkor lens |
Nikkor lens | | |
G-type Nikkor and other CPU Nikkor lens (page 19)
•The G-type Nikkor lens has no aperture ring; aperture should be selected from the camera body. Unlike other CPU Nikkor lenses, aperture does not need to be set to minimum (largest f-number) .
•CPU Nikkor lenses other than G-type Nikkor lens have an aperture ring . Set the lens aperture to its minimum and lock. When the lens is not set to its minimum aperture setting and the power switch is turned on, FE E blinks in the LCD panel and viewfinder and the shutter cannot be released .
