OTC Wireless switch/hub manual Vehicle Adapters, Universal B Adapter, Universal C Adapter

4ABS / Air Bag 2004 User Guide

Equipment Descriptions

Vehicle Adapters

The vehicle adapters are used with the DB 25 power cable, shown on the previous page. The adapter used depends on the vehicle being tested. Some of the most common adapters are shown below.

Note: The Air Bag / ABS software tells you which adapter must be used for the vehicle you are testing. For details, refer to “Step 1: Enter the Vehicle Information” on page 13.

Universal “B” Adapter (213486)

12

Figure 1.6: Universal “B” Adapter

The Universal “B” adapter is for vehicle’s equipped with Bosch, Teves, or Kelsey Hayes anti-lock brake sys- tems. The adapter has the following components:

Item 1 8-Pin Connector - connects to the 8-pin connector on the DB 25 power cable.

Item 2 Leads / Probes - connect to the data link connector

(DLC) of the vehicle’s electronic control unit.

Item 3 Special Leads (not shown) - special, add-on, leads (216094 and 3305-69) may be required for some vehicles.

Universal “C” Adapter (3305-74)

1 2

Figure 1.7: Universal “C” Adapter

The Universal “C” adapter is for vehicle’s equipped with Sumitomo anti-lock brake systems. The adapter has the following components:

Item 1 8-Pin Connector - connects to the 8-pin connector on the DB 25 power cable.

Item 2 Leads / Probes - connect to the data link connector (DLC) of the vehicle’s electronic control unit.

Ford II Adapter (3305-58)

1

2

Figure 1.8: Ford II Adapter

The Ford II adapter is for vehicle’s equipped with MCU anti-lock brake systems. It is also for reading Ford EEC- IV slow codes. The adapter has the following components:

Item 1 DLC CONNECTOR - connects to the data link connector (DLC) of the vehicle’s electronic control unit.

Item 2 8-Pin Connector - connects to the 8-pin connector on the DB 25 power cable.