OTC Wireless switch/hub manual Custom Datastream

ABS / Air Bag 2004 User Guide Chapter 4: Custom Datastream

4: Custom Datastream

31

The Custom Datastream function lets you select specific data items to display on the standard Datastream screen.

To use the custom datastream function, follow these steps:

1Follow the instructions in “Chapter 2: Start-up Steps” on page 13 to display the Diagnostic Menu screen.

2Select the data items to include in the Datastream display as follows:

a Use the Up and Down Direction key to select an item to include in the display.

b Press the ENTER key. A check mark appears in the box on the left side of the item.

Figure 4.1: Diagnostic Menu Screen

1From the Diagnostic Menu screen, select Custom Datastream and press the ENTER key. This displays the Custom Datastream selection screen.

Figure 4.2: Custom Datastream Selection Screen - before selections

Figure 4.3: Custom Datastream Selection Screen - after selections

cRepeat a and b for each item to include in the display.

Note: To deselect an item, select the item again and press the ENTER key. Optionally, use the Select All and Clear All function keys to select or deselect all of the items at once.

3When finished selecting data items, press the View Data function key to display the selected items on the Datastream screen.

Figure 4.4: Datastream Screen

4For details about the Datastream screen, refer to “Chap- ter 3: Datastream” on page 19.