OTC Wireless switch/hub manual Vehicle Identification Screen

ABS / Air Bag 2004 User Guide

Vehicle Identification Screen

When you select ABS / Air Bag 2004 from the Scan Diagnostics menu, the first Vehicle Identification screen appears.

Figure 1.14: Vehicle Identification Screen

The Vehicle Identification screen has three sections as follows:

•top section - displays vehicle identification information as you select options from the middle section.

•middle section - contains options you select in order to enter identification information for a vehicle. When you select an option and press the ENTER key, the selected option appears in the top section and the middle section changes to the next group of selection options. For exam- ple, the middle section shown above is for selecting the manufacturer. After you select a manufacturer, the middle section changes to options for selecting the vehicle’s year range. After you have entered all the information for a vehicle, the middle section displays the cable connections required for the vehicle (shown on the next page).

•bottom section - contains function keys for: 1) entering new information for a vehicle, 2) selecting and reusing information for a vehicle previously tested, and 3) viewing demonstration data.

For detailed information about using this screen, refer

to “Chapter 2: Start-up Steps” on page 13.

Chapter 1: General Information

Software Description

Vehicle Identification - Required Cables Screen

Figure 1.15: Vehicle Identification - Required Cables Screen

After you have entered all the information for a vehicle, the top section displays the vehicle information and the middle section displays the cable connections required for the vehicle (refer to “Cables” on page 3).

With this screen displayed, you make the cable con- nections to the NGIS tool and the vehicle and then press the ENTER key. This displays the Diagnostic Menu screen for the vehicle being tested, as described on the next page.

7