Turn the AC input breakers on | Outback Power Systems GTFX, GVFX

• Turn the AC input breakers ON.

BYPASS

OUTPUT

INPUT

If the FX’s AC source is available, the yellow AC IN STATUS light will blink. The FX will connect to the utility grid when the voltage is within 108-140 VAC and the frequency between 59.3-60.5 Hz. After about 30 seconds, the AC IN light should stop blinking and stay lit. A five-minute waiting period begins before selling or charging can occur. The FX can then perform a battery charge using the available AC.

16

Image 17

Outback Power Systems GTFX, GVFX manual Turn the AC input breakers on

Contents

Grid-Interactive About Outback Power Systems Warranty SummaryDisclaimer Contact Information Table of Contents Condition Voltage Range VAC Frequency Hz Seconds Allowed Important Safety Instructions Stacking Options Grid-INTERACTIVE FX Series Inverter/Charger ProgrammingStacking Concerns Components and Connections LED Color LED Action LED Indicates Mate Screens Classic Stacking Stacking OptionsStacking and Assigning FX Status Master 141 Programming the FXs ADV Down INC DEC Classic Slave Master Power Save Levels AC on Turn the AC input breakers on Auxiliary AUX Functions ADV/PASSWORD P00 List of AUX Functions Adjustable AUX Output Functions P00 ADV/FX/AUX Battery Charging Setpoints Battery Charging InstructionsMaintenance GenAlert Off Set Point On Set Point FX Default Values subject to change with FX upgrades OutBack Power Systems Two Year Limited Warranty Warranty Product Registration Extended Warranty Application U.S. and Canada only GTFX, Gvfx and PS1 Products Year Limited Warranty California Revision.2007-06-01 Installer Year Warranty Registration CaliforniaSystem Owner Product