Packard Bell 170, 300 SW, 230 manual External Equipment Connection, Scart, Antenna Connection

EXTERNAL EQUIPMENT

CONNECTION

You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below.

ANTENNA CONNECTION

1.Connect RF out on the VCR to the Antenna input on the rear of the TV.

2.Connect the antenna cable to the antenna in jack on the VCR.

3. Use the TV/AV button to select ant. source.

SCART (1)

1.Connect the A/V out jacks on the AV device to SCART jack on the TV.

2.Use the TV/AV button to select SCART1 mode.

3.Press the PLAY button on the VCR or DVD.

The VCR playback picture appears on the TV screen.

VCR/DVD

SCART 2*

1.Connect the AV out jacks on the AV device to the SCART on the TV.

2.Use the TV/AV button to select SCART2 mode.

3.Press the PLAY button on the VCR or DVD.

VCR/DVD

20

User’s Guide