Chapter 6 Going Beyond the Basics
114
To change incoming mail server settings:
1. In the Server Settings screen, tap Details.
2. Tap the Options pick list and select Incoming Mail.
3. The incoming mail options are different, depending on the connection type you
selected and the server protocol—POP or IMAP.
Get unread mail
ONLY Retrieves unread e-mail only. To get all e-mail and not just
unread e-mail, deselect Get unread mail ONLY.
Max Message Size Shows the maximum message size that you can receive.
Leave mail on se rver
(POP only) Leaves e-mail that you receive on the handheld on the
server also.
Port Nu mber Defaults to 110 for POP and 143 for IMAP servers,
respectively. If you are not sure about the correct port
number, check with your mail server administrator.
Use APOP (POP
only) Encrypts your username and password when traveling
over the network. Some services require APOP to work
properly, while others do not work properly if APOP is
used. If you aren’t sure if your ISP or web e-mail provider
supports APOP, check with your e-mail provider. See
“Adding APOP to an account” later in this chapter.
Mailbox (IMAP only) Defines the root mailbox on your IMAP server.
POP accounts IMAP account