Setting up an account with a network connection
93
Adding a signature
If you want, you can add a signature to each e-mail message you send. For
example, you can enter your name and telephone number so that they appear in
each message you send.
To add a personal signature:
1. Tap the Attach Signature to messages check box, and then enter the text of the
signature.
This signature will be attached to all your outgoing e-mail.
2. Tap OK .

Configuring your synchronize-only account

After you finish setting up a synchronize-only e-mail account, you need to
configure this account on your desktop. See“Configuring an account in HotSync
Manager” in Chapter 5 for information. You will not be able to synchronize e-mail
between your handheld and your desktop until you configure the account on your
desktop.
Setting up an account with a network connection
If you want to send and receive e-mail with a handheld using an external
PalmModem® accessory (sold separately) that is connected to a phone jack on the
wall, you can create a connection with a network provider. You can also create a
network connection to send e-mail from your handheld by using any sort of
wireless sled, such as an 802.11 sled; by using the IR (infrared) port on your
handheld to connect with an IR phone; by using a physical cable to connect to a
wireless phone; or by using an expansion card and a wireless phone, both enabled
with Bluetooth technology (both are sold separately).
Because your Palm™ i705 handheld’s Palm.Net® wireless service works only in
areas of the United States with good Mobitex coverage, you might want to use an
accessory (sold separately) to send and receive mail using a network connection in
areas with poor coverage or in other countries.