GE JVM1490SS To Remove the Charcoal Filter, To Install the Charcoal Filter, Instructions

Models: JVM1490SS JVM1490WH

1 72
Download 72 pages 15.93 Kb
Page 29
Image 29
Charcoal Filter

ge.com

Charcoal Filter

Safety

The charcoal filter cannot be cleaned. It must be replaced. Order Part No. WB2X9883 from your GE supplier.

If the model is not vented to the outside, the air will be recirculated through a disposable charcoal filter that helps remove smoke and odors.

The charcoal filter should be replaced when it is noticeably dirty or discolored (usually after 6 to 12 months, depending on usage). See “Optional Kits,” page 7, for more information.

Instructions

Remove 2 grille screws to remove

the grille.

To Remove the Charcoal Filter

To remove the charcoal filter, first disconnect power at the main fuse or circuit breaker, or pull the plug. Remove the top grille

by removing the two screws that hold it in place.

You may need to open the cabinet doors to remove the screws.

Slide the filter toward the front of the oven and remove it.

Operating Instructions

To Install the Charcoal Filter

To install a new charcoal filter, remove plastic and other outer wrapping from the new filter.

Insert the filter into the top opening of the oven as shown, maneuvering it behind the plastic grille until it fits squarely into place. It will rest at an angle behind the plastic grille on two side support tabs and in front of the right rear tab. Replace the grille and two screws. Reconnect power.

29

Troubleshooting Tips

Consumer Support

Page 29
Image 29
GE JVM1490SS, JVM1490WH To Remove the Charcoal Filter, To Install the Charcoal Filter, Instructions, ge.com, Safety