Using scene files

The settings according to the variety of shooting circumstances are stored SCENE FILE MENU. They are selected via the SCENE SELECT on the settings menu SCENE FILE screen.

When the camera-recorder is shipped from the factory, the following files are stored.

F1:

File suitable for normal shooting.

F2: FLUO.

File suitable for shooting under fluorescent lights, ie. indoors.

F3: SPARK

File suitable for shooting with fuller variations of resolution, coloring and contrast.

F4: B-STR

File for broadening the contrast of dark parts, such as when shooting sunsets.

F5: CINE V

File suitable for shooting movie-like scenes where the contrast is to be emphasized. (The recording format remains unchanged even when the scene file is changed. It must be set using the REC FORMAT item on the SCENE FILE screen. (Page 51))

F6: CINE D

File suitable for shooting movie-like scenes where the dynamic range is to be emphasized. (The recording format remains unchanged even when the scene file is changed. It must be set using the REC FORMAT item on the SCENE FILE screen. (Page 51))

Changing scene file settings

The setting value of the scene file can be changed. Also you can save the changed scene file to each position of the SCENE FILE dial.

Example: Change the name of the scene file. 1 Set the POWER switch to ON.2 Select the scene file to be changed in theSCENE FILE MENU.3 In the setup menus, select the SCENE FILE screen.

•For menu operation (Page 44 of Vol.1)

•Operations may also be performed using buttons on the remote control that correspond to those on the camera. For details, see “Description of parts (Remote control) ”. (Page 23 of Vol.1)

4 Tilt the Operation lever in thedirections
and select the NAME EDIT item.

 

5 Push the Operation lever (or tilt in the direction), tilt in the direction to select YES, and push the Operation lever again.

Shooting

19