Panasonic AG-AF100P Editing, editing, speaker, Displays, Playback, Recording, Reference, SD Memory Card, external device, Cannot record even, Cannot dub onto an

Recording

Cannot record even	• Is the write-protect switch on the SD Memory Card in the “LOCK”		P38 of
through the SD Memory		position? The card cannot be recorded to if the switch is in the	Vol.1
Card is inserted correctly.		“LOCK” position.
	•	Is the remaining memory available on the SD Memory Card
		extremely low? Please save contents onto different media and
		delete unneeded data from the card, or use a new card instead.
	•	Has the SD Memory Card been correctly formatted? Alternatively, is	P36 of
		the card of a format that is incompatible with this camera? Reformat	Vol.1
		the card with the camera.
	•	8 MB to 16 MB SD Memory Cards cannot be used for shooting	P13 of
		movies.	Vol.1
Recording stops by itself.	•	Is your SD Memory Card compatible with use for video recording?	P12 of
		Always use an SD Memory Card compatible with use for video	Vol.1
		recording.

Editing

Cannot read the data on the	•	Make sure the SD Memory Card is formatted correctly.	P36 of
SD Memory Card.		If it is not, format the card in the unit.	Vol.1
Cannot perform nonlinear	•	Check the specifications of your computer and connecting cable.	P42
editing.
Cannot dub onto an	•	Make sure the external device is connected correctly.	P42
external device.

Displays

Something is wrong with	• The time code display may not register a regular count if a clip is	—
the time code display.	played in the reverse slow mode. This is normal.

Playback

Cannot play even when I	•	Make sure the PB lamp is on (press the mode button).	P28
press the play button.		No kind of playback operation can be performed unless this lamp
		is on.
Mosaic-like noise appears	•	This noise is inherent to digital video technology. This is normal.	—
when I cue or review a clip.
Images do not appear on	•	Make sure the input selector on your television is set to video input.	—
the television even though		Read the television’s instructions carefully and select the correct
I have connected the		video input connector for the camera-recorder.
camera-recorder properly.
Cannot hear any sound	•	You may have turned down the camera-recorder’s volume control	P40
from the camera-recorder’s		too far.
speaker.		Adjust the volume level using the AUDIO MON/ADV button +.

Reference

(Continued on the next page)

67