Uploading the metadata (META DATA)

You can perform any of the following operations. If necessary, make preparations prior to undertaking the operations.

Loading the metadata

•Insert the SD Memory Card on which the

metadata is recorded into the unit. (For details on contents of the metadata, see the previous page.)

Selecting whether to record the metadata on the SD Memory Card

Initializing the metadata inside the unit Displaying the metadata inside the unit

1 Press the mode button and select CAM mode.2 Press the MENU button.

Menu operation (Page 44 of Vol.1)

3 Tilt the lever in the directions to select META DATA, and push the Operation lever (or tilt in the direction).

4 Tilt the Operation lever in the directions to select item, and push the Operation lever.

CARD READ:

Read metadata set to the SD Memory Card with the camera.

Move to LOAD, push the Operation lever, select whether or not to read the metadata (YES/NO), and push the Operation lever again.

āā Up to 10 items of metadata on the SD

 

Memory Card can be displayed, starting

Shooting

alphanumeric characters are used in the

from the most recent date of production.

 

āā If characters other than single-byte

 

metadata file name to be loaded, they are

 

 

displayed as “∗”.

 

RECORD:

Select this to set whether to record the metadata to be loaded into the unit simultaneously on the SD Memory Card. Select ON to record the metadata or OFF to cancel the recording, and push the Operation lever. The factory setting for this mode is OFF.

USER CLIP NAME:

The USER CLIP NAME recording method is selectable. Please refer to the next column below.

META DATA PROP:

Select this to display the metadata which has been recorded in the unit.

CLIP COUNT RESET:

Reset the counter value to 1.

Select whether or not to reset (YES/NO), and push the Operation lever.

META INIT SET:

Select this to initialize the metadata which has been recorded in the unit.

Select YES to initialize the metadata or NO to cancel the initialization, and push the Operation lever.

5 Press the MENU button to release the menu mode.

Selecting the USER CLIP NAME recording method

Press the MENU button and select META DATA → USER CLIP NAME to select the recording method. Two options are available: TYPE1 and TYPE2.

USER CLIP NAME to be recorded

 

TYPE1

TYPE2

 

 

 

If clip metadata has

Uploaded

Uploaded data

+ COUNT

been read in

data

value∗

 

 

If no clip metadata

 

 

has been read in

Sequential 5-

Sequential 5-

or if the setting

digit number,

digit number,

for recording clip

in order of

in order of

metadata has been

recording

recording

turned off

 

 

23