Screen displays (continued)

•The AWB error message (LOW LIGHT / LEVEL OVER) is displayed. (Page 42 of Vol.1)

•The functions allocated to the USER buttons are displayed while you hold down the DISP/ MODE CHK button.

6Microphone level automatic control display Appears when in the setup menus, RECORDING SETUP screen, MIC ALC, you have selected “ON”.

7Marker luminance display

When markers are displayed, the brightness level around the center of the screen is indicated as 0% to 99%. “99%↑” appears if the percentage is over 99.

•When the AREA Y-GET function is operating, the brightness level around the center of the AREA frame is displayed.

8Date and time displayMonthDay of the monthYear:2001 - 2039 HoursMinutesSecondsmmm dd yyyy hh:mm:ss9Frame rate display

Displays recording frame rate.

Not displayed when set to 1080/60i.

10Shutter speed display

The shutter speed is displayed here.

11Audio level meter display (Page 18)12Auto iris control display

STD: Standard auto-iris control

SPOT: Auto iris control for spotlight

BACK: Auto iris control for backlight compensation

13Iris display

Displays F value. The STEP of the display value differs depending on the lens.

14Zoom position display

The zoom poison is displayed with Z00 (maximum wide-angle) - Z99 (maximum zoom). The unit can be switched to mm in the ZOOM & FOCUS item of the setting menu DISPLAY SETUP screen.

The focus position display does not move linearly.

15Focus control information display

Displays the focus control information with 99 - 00. In the auto focus mode, AF appears. In the manual focus mode, MF appears.

The units can be switched between feet and m in the ZOOM & FOCUS item of the setting menu DISPLAY SETUP screen.

The focus position display does not move linearly.

16ND filter display

ND filter selected is displayed.

17Gain display

Displays the gain value of the image amplifier configured. (During the auto mode, AGC is displayed.)

18AWB information display

Displays the information of white balance.

ATW:

When ATW is set

P3.2K/P5.6K/VAR:

In the case of preset

Ach/Bch:

In the case of A/B

LOCK:

When ATW is locked

19Marker display

During shooting, pressing the ZEBRA button once or twice will display the marker.

20Optical Image Stabilizer display Displayed when Optical Image Stabilizer is ON.

21Scene filename display (Page 19)22Remaining battery capacity display

When using Panasonic-manufactured batteries compatible with this product, the remaining battery capacity is displayed in minutes.

Time remaining will be displayed after a brief pause.

•The battery display will change

→→→→

as battery capacity decreases. will be displayed in red when less than 3 minutes

are remaining, and will flash when the battery is empty.

(Continued on the next page)

46