Panasonic AG-AF100P ON:, OFF, ON:, ON:, OFF, Item, mode, OFF:, NAME, PROP, CLIP, Item, mode, OFF:, (PB), OFF:, BOTH, OFF:, (PB), TYPE1, REAR:, RECORD, TYPE2:, FRONT:, Display

Setup menu list (continued)

META DATA screen

Item	Display		Description of settings
	mode
CARD READ	(Camera)	Loads the metadata recorded on the SD Memory Card on to the unit.
		SLOT1, SLOT2, NO
		• “NO FILE’ is displayed when no metadata is recorded on the SD Memory Card.
RECORD	(Camera)	Sets whether to record the metadata to be loaded on the unit simultaneously on
		a SD Memory Card.
		ON:	Records simultaneously
		OFF:	Does not record simultaneously
USER CLIP	(Camera)	Selects the method of recording the USER CLIP NAME.
NAME		TYPE1: The user clip name is the same as the CLIP NAME if no uploaded
			metadata or data exists.
		TYPE2: The user clip name is the same as the CLIP NAME if no combination of
			data and COUNT value is uploaded, or if no uploaded data exists.
META DATA	(Camera)	Displays the metadata recorded in the unit.
PROP		YES, NO
CLIP	(Camera)	Resets the COUNT value to 1.
COUNTER RST		YES, NO
META INT SET	(Camera)	Initializes the metadata recorded in the unit.
		All settings, including the ON or OFF setting for RECORD are now cleared.
		YES, NO

OTHER FUNCTIONS screen

Item	Display			Description of settings
	mode
LENS CHECK	(Camera)	ON:		Checks the communication status with the lens. Video shooting is not
		OFF:		performed if checking is not proper.
				Does not check the communication status with the lens.
		•	It is recommended to set LENS CHECK to ON when you are using lenses
			conforming to the Micro Four Thirds and Four Thirds standard.
		•	When you are using a lens that has no communication connection between the
			camera and lens through the use of a mount adaptor, video shooting is enabled
			when you set this item to OFF.
IR REMOTE	(Camera)	Sets the operations of the supplied remote control unit.
	(PB)	ON:		Accepts commands from the remote control.
				• Note that if the same type of remote control is used near the
				unit, the unit may receive commands from the other remote
				control, during shooting for example, and suddenly operate in an
		OFF:		unexpected manner.
				Does not accept commands from the remote control.
TALLY LAMP	(Camera)	Sets lighting of the tally lamp.
		FRONT: The front tally lamp (microphone side) lights.
		REAR: The rear tally lamp (viewfinder side) lights.
		BOTH: Both tally lamps light.
		OFF:		No tally lamp lights.
CLOCK SET	(Camera)	Sets the built-in calendar of the camera.
	(PB)
					indicates the factory setting.

62